Download Print this page

Energizer 10343-CO-10 Assembly And Care Instructions page 2

10-packsolar pathway lights

Advertisement

Care & Cleaning
Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.
Keep the solar panel free of snow and debris to allow the battery to charge
properly.
Battery Warnings
Do not use alkaline, standard (carbon-zinc) or Ni-Cd (nickel cadmium)
batteries in our solar lights.
Only use Nickel Metal Hydride rechargeable batteries (Includes 10
rechargeable batteries.)
Do not mix battery types. Only use Ni-MH (nickel metal hydride) batteries.
Adverse conditions of cold, extreme cold, extreme heat plus humidity and
dampness may affect battery performance.
Do not open, short circuit or mutilate batteries as injury may occur.
Batteries must be recycled or disposed of properly.
Always purchase the correct size and grade of battery most suitable for the
intended use.
Clean the battery contacts and also those of the device prior to battery
installation.
Ensure the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from equipment that will not be used for an extended period
of time.
Remove used batteries promptly.
CONTAINS NICKEL METAL HYDRIDE
RECHARGEABLE BATTERIES.
BATTERIES MUST BE RECYCLED
OR DISPOSED OF PROPERLY.
CAUTION: Do not dispose of battery in fire.
Problem
Light stops working after
period of working properly.
The lights only operate for a
short duration in the evening.
Alpan Lighting Products, Inc. warrants this product to be free for two (2) years against any defects that are due to faulty materials or workmanship. Alpan Lighting Products, Inc. shall promptly correct such
defects by repair or replacement, at its option. This warranty covers only product defects and shall expire two years after the date of purchase by the original purchaser. Proof of Purchase (Sales Receipt) is
required.
This warranty does not apply to (1) bulbs and batteries or (2) defects caused by and resulting from misuse, neglect, accident or improper operation, maintenance, storage, transportation handling of the
product. The warranty does not cover any transportation costs for return of the product or for reshipment of any repaired or replaced product, or cost associated with installation, removal or reinstallation of
the product. This warranty extends to the original purchaser only and is not transferable or assignable to subsequent purchasers. This warranty does not cover surface scratches, weathering, or natural aging
to the patina of fixture finishes as this is considered normal wear.
Alpan Lighting Products, Inc. shall have no responsibility for damage to persons or property or other loss or injury resulting from a defect in the product or from improper use or installation. UNDER NO
CIRCUMSTANCES SHALL ALPAN BE LIABLE SPECIAL OR CONSEQUENTIAL DAMAGES. ANY WARRANTIES IMPLIED BY LAW, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO TWO YEARS AFTER THE DATE OF THE ORIGINAL PURCHASE. In no event shall Alpan Lighting Product, Inc.'s liability under this warranty exceed
the cost of repair or replacing such defective product, and Alpan's maximum liability under any warranty is in lieu of all other warranties expressed or implied.
Some states do not allow the exclusion or limitation of special or consequential damages or allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This
warranty gives you specific legal rights, and you may have rights that vary from state to state. If you feel you have a claim under this warranty, contact consumer service for advice on handling the claim.
Written notice of any defects must be given to Alpan Lighting Products, Inc. upon discovery.
R B R C
Ni-MH
The battery is not adequately charged. Place the unit in direct sunlight for three sunny days.
The units are not getting sufficient sunlight. If the sunlight is blocked by a tree, house, or other objects, move the units
to a sunnier location. Note that lighting time will be shorter on overcast days.
The light level is too high for the solar lights to turn on. The solar lights are designed to turn on when it is dark outside.
Make sure the solar top housing is not under any direct light source when testing.
The battery may be weak or can no longer produce a charge. Replace the battery.
The units are not getting sufficient sunlight. If the sunlight is blocked by a tree, house, or other objects, move the units to
a sunnier location. Note that lighting time will be shorter on overcast days.
The battery may be weak or can no longer produce a charge. Replace the battery.
Two Year Limited Warranty
Maintenance
Replacing the battery
Remove the solar light assembly from
the post by gently pulling upwards.
Remove the solar top housing (A)
from the glass lens (B) using a
counter-clockwise twisting motion.
Remove the battery cover on the
bottom of the solar top housing (A)
and replace the battery.
Re-assemble the unit.
IMPORTANT: Use only
AA 800mAh Nickel Metal
Hydride (Ni-MH)
rechargeable batteries for
the solar lights. These are
available at most hardware
stores or through Alpan
Lighting Products at
1-800-711-1585.
IMPORTANT: Dispose of the battery in accordance with
local, state and federal regulations.
Troubleshooting
Solution
Problem Solving
Made in China
2
Solar Top
1-800-7 1-1585
1
Housing
Made in China/Hecho en China/Fabriqué en Chine
Use Rechargeable Battery Only
Sólo Use Batería Recargable
Utilisez La Pile Rechargeable Seulement
Ni-MH A 1.2V 800mAh
A
Manufacture Date : 11 / 2018
Battery
Battery Cover

Advertisement

loading

This manual is also suitable for:

10343-bz-1010343-gm-1010343-ss-1010343-bk-10