system has dead, in fact, it is CTP noumenon break down, so cannot
touch.
2) In most cases, because FLASH breaks down, FLASH weld reason or
FLASH noumenon break down, need to:
a) Firstly, try to refresh software again.
b) If refresh software cannot solve, it must change FLASH,in view of
the machine on the FLASH point of glue, so weld will be more
difficult.
And then, consider CPU chip problem, CPU noumenon break down or weld
3)
cause FLASH corresponding data as well as order place mistake, it may be
2013-10-18
YU220 service manualV1.0
take place crash phenomenon.
Huawei secrets, no dispersion without permission