Haag-Streit IM 900 Installation Manual
Imaging module
Hide thumbs
Also See for IM 900:
- Instructions for use manual (23 pages) ,
- Instruction manual (20 pages) ,
- Instructions for use (3 pages)
Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Haag-Streit IM 900
Summary of Contents for Haag-Streit IM 900
- Page 1 INSTALLATION GUIDE IMAGING MODULE IM 900 Edition 1.30 / 2020 – 08 Tradition and Innovation – Since 1858, visionary thinking and a fascination with technology have guided us to develop innovative products of outstanding reliability: Anticipating trends to improve the quality of life.
- Page 2 IMAGING MODULE IM 900 Edition 1.30 / 2020 – 08 Purpose of use Intended use This device is an accessory for the HAAG-STREIT BQ 900 slit lamp which can be used to produce digital photographs and videos for documentation of the eye. NOTES! This manual is ONLY intended for installation of IM 900 units.
-
Page 3: Table Of Contents
Attaching the label for automatic left/right detection ........................5 Connecting the IM 900 to the optical path ........................... 6 List of modifications ................................10 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220556 – Edition 1.30 / 2020 – 08... -
Page 4: Safety Instruction
Safety instructions have been added throughout the text where applicable. They are classified according to importance and designed to help avoid risk to patients and operating staff, while preventing damage to the IM 900 appliance and helping to ensure that it functions safely and remains in perfect working order. -
Page 5: Installation
ESD – Electrostatic Discharge! Electronic circuits of the IM 900 are sensitive to electrostatic discharges. ESD –Electrostatic Sensitive Device –, The technician must be grounded for all repairs. Keep parts sensitive to electrostatic discharges in static shielding bags for storage, transportation and shipping. -
Page 6: Connecting The Im 900 To The Optical Path
Align the marking points on the upper side of the parts to be connected. Turn the locking ring in direction of the arrow to tighten. Fig. 4 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220556 – Edition 1.30 / 2020 – 08... - Page 7 (3) through a braided sleeving (4). Refer to the below drawing in case you need to know the cable functions on your installation. Fig. 7 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220556 – Edition 1.30 / 2020 – 08...
- Page 8 Fix the loop to the computer cable by using a tie wrap. Fig. 10 Tighten the braided sleeving and fix it with a tie wrap. Fig. 11 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220556 – Edition 1.30 / 2020 – 08...
- Page 9 RM02 on the cross slide. Fig. 12 Connect the computer cable USB 3.0 to the PC and the power supply to the power network. Fig. 13 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220556 – Edition 1.30 / 2020 – 08...
-
Page 10: List Of Modifications
Adaptations in chapter 2.2 about the cabling of the RM02. 1.10 24.03.2016 Add information about functions of the headrest cables in fig. 7. 1.00 01.12.2015 First release. © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220556 – Edition 1.30 / 2020 – 08... - Page 12 For further questions please contact the HAAG-STREIT Customer Support at: service@haag-streit.com http://www.haag-streit.com/contact/contact-your-distributor.html PRODUCTS CER TIFIED FOR BOTH THE U.S AND CANADIAN MARKETS, TO THE APPLI- CABLE U.S. AND CANADIAN STANDARDS HAAG-STREIT AG Gartenstadtstrasse 10 1250 3098 Koeniz, Switzerland Phone +41 31 978 01 11...
Need help?
Do you have a question about the IM 900 and is the answer not in the manual?
Questions and answers