Advertisement
Lower Mounting Bracket
Position lower bracket on
top rail
Additional wood blocking may be
required
Attach rod end of
spring to lower bracket
Variable speed drill
Measuring Tape & Pencil
#2 Phillips screwdriver
Bedlift
22"
24"
36"
22"
24"
3"
Pre-drill several holes - temporarily install
Lower Bracket with 5/8 " screws at
of bed
Install the wood blocks at the
locations with 1¼" gold
screws provided. Do not glue blocks
*Pre-drill
holes
Required for Installation:
Instructions
1
24"
26"
30"
top rail
back
back
Temporarily attach
angle bracket to the
center of the wood
block with two 5/8"
screws provided
onnect the spring to the
upper bracket assembly on
both sides of the bed
Advertisement
Table of Contents
Summary of Contents for Hatchlift RV Bedlift Kit
- Page 1 Required for Installation: Variable speed drill Measuring Tape & Pencil #2 Phillips screwdriver Bedlift Instructions 22” 24” 36” 24” 26” back 30” back 22” 24” 3” Lower Mounting Bracket Pre-drill several holes - temporarily install Temporarily attach Position lower bracket on top rail angle bracket to the Lower Bracket with 5/8 ”...
- Page 2 Warranty: Hatchlift, LLC warrants to buyer for a period of 12 months from the date of purchase that the Hatchlift product will be free from defects in material and workmanship. If within the warranty period, the product is found to be defective,...
Need help?
Do you have a question about the RV Bedlift Kit and is the answer not in the manual?
Questions and answers