Fluke Biomedical WiFi Connector Instructions Manual

Introduction
The WiFi Connector (the Product or Connector) makes a wireless connection
between Fluke Biomedical instruments and a PC with Ansur Software.
If the Ansur version on the PC is not 3.1 or later, then download the latest
Ansur software from: www.flukebiomedical.com.
Safety
A Warning identifies hazardous conditions and actions that could cause
bodily harm or death. A Caution identifies conditions and actions that could
damage the Product, the equipment under test, or cause permanent loss of
data.
To prevent possible electrical shock, fire or personal injury,
follow these guidelines:
• Read all safety information before you use the Product.
• Carefully read all instructions.
• Use the Product only as specified, or the protection supplied
by the Product can be compromised.
• Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
• Do not use the Product if it operates incorrectly.
• Use this Product indoors only.
• Use only current probes, test leads, and adapters supplied
with the Product.
• Do not put metal objects into connectors.
• Disconnect the battery charger and move the Product or
battery to a cool, non-flammable location if the rechargeable
battery becomes hot (>50 °C) during the charge period.
• Replace the rechargeable battery after 5 years of moderate
use or 2 years of heavy use. Moderate use is defined as
recharged twice a week. Heavy use is defined as discharged
to cutoff and recharged daily.
PN 4766241 April 2016, Rev. 1
©2016 Fluke Corporation. All rights reserved.
Specifications are subject to change without notification.
All product names are trademarks of their respective companies.
WiFi Connector
XW
Warning
Instructions