Advertisement
www.garagedoorsonline.co.uk
01926 463 888
4). KEYSWITCH OR PUSH BUTTON OPERATION
If the door has been fitted with either keyswitch or push button
operation, it will have been fitted adjacent to the door itself. To
open the door, turn & hold the key, or press and hold the up
button, until the door reaches its open cycle. To close the door,
repeat the above in the reverse direction.
5). MOTOR THERMAL CUT OUT
The motor within the door axle has an integral thermal cut out, to
prevent it from overheating from over use. If this happens, allow
sufficient time for it to cool down before using (approx. 60 minutes,
however this can alter dependent on ambient temperature). If the
thermal cut out is a regular occurrence, the door may be operated
excessively, and may cause permanent damage to the motor. This
may affect future warranty claims.
6). POWER FAILURE
In the event of any disruption to the power supply, including
thermal cut out, the door will be fitted with a manual override
facility. If the override is fitted on the same side as the door
mechanism, simply locate the hook on the end of the crank handle,
into the pre fitted eyelet, and rotate in the desired direction. If the
door has been supplied with an external low level override, firstly
remove the lock, before inserting the folding crank handle, and
again turn to operate. DO NOT OVERWIND.
5
Hide quick links:
Advertisement
