Table of Contents
Advertisement
CHARGING GUIDE - THERE ARE 2 OPTIONS
Step 1
CHARGING TAKES ABOUT 2 HOURS, AND CONTROLLER WILL
NOT WORK WHILE DEVICE IS CHARGING.
PAIRING GUIDE
4
Option 1 - With a USB Cable
Plug the micro-USB end of the enclosed BT32XIS charging
cable into the BT32XIS (A). Plug the USB end of the BT32XIS
charging cable into a power source. When connected to a
USB power source, the
Option 2 - In Your Car
Plug (A) control module into (B) 12V Plug, then insert into
your car's 12v socket (cig plug)
Step 2
After charging you BT32XIS, plug the Bluetooth adapter into
your car's AUX port.
Step 1
Turn on BT32XIS by pushing and holding the Bluetooth
button for 3 seconds.
Power is now on, and you are now in pairing mode.
icon will glow red while charging.
icon should begin blinking blue.
Advertisement
Table of Contents
