Lec So Sound System User Manual

Introduction

Congratulations on your purchase of a table with the So Sound® System.
The following pages of this user guide will will inform you how to set up and use this system.

So Sound Amp Operating Instructions

The So Sound Amp is the proprietary amplifier used to power your So SoundHearts. It has been
specially designed to work with almost any musical device, and to deliver the deep, resonating
tones and harmonies that are so beneficial to a relaxing experience.
Resonance
Adjustment
Knob

Volume/Resonance Control

The resonance knob should not have to be more than half way (11-12:00 o'clock position) or
distortion will be a problem. The status light will turn green when the system is in distortion
and you will hear a popping sound.

Using a Phone or Player

If you want to use a phone or another player, plug in the 3.5mm male-male cable into
the headphone output of your phone and plug in the other end into the front of the amp
labeled IN.
© Living Earth Crafts 2019, All Rights Reserved
Never force the connection between your phone/music player and the So Sound
Amp. The correct cable connection is standard on most devices, should never
require forced pressure to complete.
From your
player's
headphone
output
Status Output to
Light headphones
or speakers
with separate
power
USER GUIDE
So Sound® System
Volume
Adjustment
Knob
1-400-0056 • Rev A • 3/7/19