Sony HAR-D1000 Service Manual page 15

Microcomputer Version Display
Procedure:
1. Enter the test mode, then turn the
2. The [MC] version is displayed, and then rotate the
The message <TA> version is displayed. Rotate the
[ALBUM]
3. Press the dial to display [MMI] version.
[ALBUM]
4. Press the dial to display [HD] version.
5. To exit from the mode, press the
FL Display Test/LED display test
Procedure:
1. Enter the test mode, then turn the
2. All segments of fluorescent display tube turn on fully, and LED (HDD) turn on.
[ALBUM]
3. Pressing the dial cause almost half segments and LED (HDD) to turn off.
[ALBUM]
4. Press the dial and the pattern of segments changes to another.
5. To exit from the mode, press the
Key/Jog Input Test
Procedure:
1. Enter the test mode, then turn the
2. Clockwise rotation of the
level meter down.
3. Press the buttons in order and the number of Key decreases while turning off segments of fluorescent display tube. And when all buttons
were pressed, "Key OK!" will be displayed.
4. To exit from the mode, press the
[ALBUM]
dial to display "<Version> 1", and press the
[ALBUM]
[ALBUM]
[ALBUM]
dial.
[ALBUM]
dial to display "<FLD> 2", and press the
[ALBUM]
dial.
[ALBUM]
dial to display "<Key, Jog> 3", and press the
[ALBUM]
dial moves the peak level meter up, or counterclockwise rotation of the
[ALBUM]
dial.
[ALBUM]
dial.
dial again and <CD>, <CDM>, <DISP> and <TM> versions are displayed.
[ALBUM]
[ALBUM]
HAR-D1000
Ver 1.1 2001.12
dial.
dial.
dial. The message "Key = 21" is displayed.
[ALBUM]
dial moves peak
15