Summary of Contents for SEI Carverdale Corner Vanity Sink BT7871A0TX
- Page 1 BT7871A0TX/BT7871B0TX Corner Vanity Sink arverdale Assembly Instructions For assistance with assembly, contact: Southern Enterprises, Inc. Customer Service: 1-800-633-5096 service@seidal.com www.seifurniturestore.com PO#: Page | 1...
- Page 2 Carverdale Corner Vanity Sink Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing.
- Page 3 11L) 11R) Quantity 12L) Quantity Quantity of 1 of 1 of 1 Drawer Back Left Drawer Back Right Drawer Vertical Panel Left 12R) Quantity of 1 Quantity Quantity of 1 of 1 Drawer Vertical Panel Right Drawer Back Panel Middle Drawer Bottom Panel Quantity 16L)
- Page 4 Allen Wrench Care and Cleaning Instructions: For replacement parts or Before using, wipe with a clean, dry cloth. Avoid rubbing or questions, please call SEI scratching the surface with rough or abrasive objects. Customer Service at 1-800-633-5096. Assembly Tool Required: No.2 Phillips Screwdriver...
- Page 5 CARVERDALE CORNER VANITY SINK Assembly Instructions Insert Cam Locks (B) into corresponding holes on Faux Drawer Front Panel (3) and Bottom Rail (4). Do not overtighten cam bolts. Stop when they feel secure. Screw Cam Bolts (A) into threaded holes on Left Panel (2L). Attach Left Panel (2L) to Faux Drawer Front Panel (3) and Bottom Rail (4) by inserting Cam Bolts (A)
- Page 6 Insert Cam Locks (B) into corresponding holes on Back Rails (5/6). Screw Cam Bolts (A) into threaded holes on pre-assembled unit from Figure 2. Attach Back Rails (5/6) to pre-assembled unit from Figure 2 by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes until all panels meet.
- Page 7 Insert Cam Locks (B) into corresponding holes on Back Rails (5/6). Screw Cam Bolts (A) into threaded holes on pre-assembled unit from Figure 4. Attach Back Rails (5/6) to pre-assembled unit from Figure 4 by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes until all panels meet.
- Page 8 Connect pre-assembled unit from Figure 5 to Bottom Panel (8) with Bolts (J) & Washers (L/M). Tighten Bolts (J) with Allen Wrench (N). Figure 7 Attach Drawer Vertical Panels (12L/12R) to Drawer Back Panels (13) with Screws (I) and Wood Dowels (E).
- Page 9 Attach Drawer Back Panels (11L/11R) to pre-assembled unit from Figure 8 with Screws (I) and Wood Dowels (E). Figure 9 Insert Drawer Bottom Panel (14) into grooves of pre-assembled unit from Figure 9. Figure 10 Page | 9...
- Page 10 Attach Drawer Side Panels (10L/10R) and Drawer Front Panel (9) to pre-assembled unit from Figure 10 with Screws (I) and Wood Dowels (E). Tighten Screws (I) with Phillips screwdriver (not included). Figure 11 Attach Knob (F) to pre-assembled unit from Figure 11 with Bolt (H). Figure 12 Page | 10...
- Page 11 Insert assembled drawer into assembled unit from Figure 7. Ensure drawer glides operate smoothly. If drawer hits adjoining parts, loosen the screws on the male slide and adjust the height of the drawer. Figure 13 Insert Back Legs (17) into pre-assembled unit from Figure 14.
- Page 12 Attach Back Legs (17) to pre-assembled unit from figure 14 with Bolts (K) and Washers (L/M). Tighten Bolts (K) with Allen Wrench (N). Insert Front Legs (16L/16R). Figure 15 Attach Front Legs (16L/16R) with Bolts (K) and Washers (L/M). Tighten Bolts (K) with Allen Wrench (N).
- Page 13 Insert pre-assembled unit from Figure 17 into Top Metal Frame (15). Figure 17 Page | 13...
- Page 14 Attach pre-assembled unit from Figure17 to Top Metal Frame (15) with Bolts (K) and Washers (L/M). Tighten Bolts (K) with Allen Wrench (N). Figure 18 Attach pre-assembled unit from Figure 19 to pre-assembled unit from Figure 13 with Bolts (K) and Washers (L/M).
- Page 15 Insert Marble Top (1) into pre-assembled unit from Figure 20. Figure 20 Now your Carverdale Corner Vanity Sink is ready for use! Note: Install not included piping items: faucet, drain, and supply lines to vanity sink according to the instructions supplied with those If the vanity sink is not level, adjust the foot items.
- Page 16 Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product.
Need help?
Do you have a question about the Carverdale Corner Vanity Sink BT7871A0TX and is the answer not in the manual?
Questions and answers