Summary of Contents for Summit Appliance Accucold ACR17
Page 1
ACR17 Drawer Instructions This pharmacy refrigerator can hold up to nine drawers, but it is best to use no more than seven to make sure air is evenly distributed throughout the interior. You can mix shelves and drawers as needed. How to Install the ACR17 Drawer 1.
Page 2
Note: If drawers are being installed towards the bottom of the refrigerator, start at the fourth notch up. 2. Align the hooks of the bracket at a 45° angle upwards and push down to secure in place. You can use the number or letter code printed above the holes to make sure the brackets are lined up evenly.
Page 3
3. Slide the drawer into the tracks one side at a time by guiding the drawer into the track until you hear a click. Repeat this same step for the other side. Slide the drawer in and out to make sure it is correctly aligned and leveled. NOTE: If the drawer gets stuck or does not feel level, DO NOT try to push it in, as you may damage the glides.
Page 4
Removing the ACR17 Drawer 1. Empty all stored contents from the drawer before removing it from the unit. 2. Pull the drawer all the way out. 3. You will see a small black latch on each side of the drawer. Push the latch on the left side up and pull the latch on the right side down at the same time.