Subscribe to Our Youtube Channel
Related Manuals for Leckey firefly GoTo
Summary of Contents for Leckey firefly GoTo
- Page 1 User manual - for Size 1 & 2 and Floorsitter For French / Italian / Spanish / Mandarin / Portuguese / Swedish / Japanese please refer to our website. www.fireflyfriends.com...
- Page 2 4. Always ensure the GoTo Seat is firmly secured before which is helpful, as soap can clog your fabric. approved by Firefly by Leckey for the use of the GoTo Seat use and the straps are tight. 3. The seat covers can be removed from the hard plastic are: 5.
- Page 3 If in any doubt about the continued safe use of your Firefly support straps should be very slack. By Leckey product or if any parts should fail, please cease 5. If placed in a trolley: guide the child’s legs slowly / gently using the product and contact our customer services through leg gaps in shopping trolley;...
- Page 4 Section 11 10(b) Setting up the Floorsitter Using the GoTo Seat on a hardback chair (If purchased with GoTo Seat) 11(a) Attaching GoTo to a hardback chair Recess Metal support frame Stuck to Floorsitter Velcro dot base Place the metal support frame so that The floorsitter will arrive in two parts it sits in the recess shown and sticks to as shown above.
- Page 5 11(a) 11 (b) Attaching GoTo to a hardback chair Opening and closing the 5 point buckle Pull straps outwards to tighten. Tidy excess straps into loops. Before beginning, ensure shoulder, Attach the two lateral support lateral support and groin straps are fastenings to the sides of the mid- all loose and unfastened.
- Page 6 Section 12 11 (b) 11 (c) Opening and closing the 5 Adjusting the headrests and Using the GoTo in a supermarket trolley point buckle lateral support Smaller Child Larger Child In Size 2 GoTo the groin strap mounting Unscrew the knob at the headrest location can be moved backwards or anti-clockwise to remove the headrest forwards to suit your child’s needs.
- Page 7 Section 13 Section 12 Using the GoTo in a supermarket trolley Attaching the GoTo Seat to the Floorsitter accessory Before attaching the GoTo Seat to the Floorsitter accessory, follow steps in section 10(b). Angle A Recess Angle B Recess Fasten straps E and F underneath the trolley seat and pull to tighten. Loop the straps and tidy in to clips.
- Page 8 Section 14 Section 13 Attaching the GoTo Seat to the Floorsitter accessory Taking GoTo apart and removing the upholstery 14 (a) Standard Headrest Ensure that all the straps are With this knob lowered/removed to allow unfastened. The knob pictured is the movement of prongs, place the prongs support for attachment on to the GoTo.
- Page 9 14 (a) 14 (b) Standard Headrest Advanced Headrest Detach the headrest from the GoTo base completely by removing the shoulder strap buckles from the headrest. Unscrew the knob at the headrest anti- Screw the knob into the back of the clockwise to remove the headrest from headrest to ensure safe keeping.
- Page 10 14 (b) 14 (b) Advanced Headrest Advanced Headrest Detach the shoulder straps. Turn headrest over and partly slide out Pull straps through the headrest plastic foam insert. part and the foam to remove the cover. Resulting set of parts. Unfasten the straps with poppers attached as shown on both sides. Push the straps through the holes in the headrest.
- Page 11 14 (c) 14 (c) Lateral Support Lateral Support Turn the GoTo Seat over and detach Start with all the straps connected to the Loosen the lateral support side straps as much as possible but keep the buckle connected. the lateral support by turning the knob buckle as shown.
- Page 12 14 (d) 14 (d) Seat Base Seat Base Connect the straps together in their pairs and set aside in a safe place. Remember that straps E and F are longer and should be attached back into seat pad only. Straps E and F have a different warning label which can be used to identify them if necessary.
- Page 13 Section 15 15 (a) Seat Base Putting the upholstery back on and assembling GoTo 15 (a) Seat Base As with the above straps, thread the Retrieve the straps for the GoTo insert, buckle of the groin strap through its with straps A, B, C and D at the rear of corresponding hole in the upholstery at the GoTo base and straps E and F (the the bottom of the seat pad, followed by...
- Page 14 15 (b) 15 (b) Lateral Support Lateral Support Before starting, plan which lateral support strap needs to be attached to which side of the upholstery in order for the buckle to fasten. Loosen the lateral support straps on the Insert the lateral support strap into the Thread strap through the lateral support insert as shown (this leaves the buckle on the outside of the central buckle as much as possible.
- Page 15 15 (b) 15 (c) Lateral Support Advanced Headrest Remove the knob that is keeping the slider component in place. Place the lateral support over the slider mechanism component and secure using the knob. Place foam mould onto plastic headrest Overview of parts. insert and place halfway into advanced headrest upholstery.
- Page 16 15 (c) 15 (d) Advanced Headrest Standard Headrest Attach shoulder strap buckles to the bottom holes of headrest. Insert shoulder strap buckle straight through the front of the headrest insert and secure at the back. Slide headrest insert into its upholstery and fasten poppers. Align screw hole of headrest to the gap in GoTo base.
- Page 17 Section 16 Notes Sizing Information Size 1 Size 2 Seat base to top of headrest 540/21 680/27 Max (mm/inches) Seat base to top of headrest 380/14 510/20 Min (mm/inches) Lateral support width 260/10 300/12 Max (mm/inches) Lateral support width 190/7.5 210/8 Min (mm/inches) Seat Depth...
- Page 18 Notes Notes...
- Page 19 www.fireflyfriends.com Firefly 19C Ballinderry Road, Lisburn, BT28 2SA, Northern Ireland UK 0800 318265 ROI 1800 626020 LS335-02...
Need help?
Do you have a question about the firefly GoTo and is the answer not in the manual?
Questions and answers