Page 1
PLAYPEN INSTALLATION VIDEO BARRIER 75cm (29.5’’) Tall Fits Openings 73cm to 370cm (28.8” - 145.6”) IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard EN 12227:2010.
TABLE OF CONTENTS SAFETY INFORMATION General Maintenance Warnings Mountings WHAT’S IN THE BOX Parts INSTALLATION Gate Placement Underside Bracket Wall Assembly Topside Bracket Wall Assembly Room Divider or Safety Barrier To Add Extra Panels To Remove Unwanted Panels Playpen Assembly OPERATION How to Open Safety Play Mat...
SAFETY INFORMATION GENERAL Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential. MAINTENANCE Regularly check that the gate is functioning correctly, lubricate hinges and moving components with a suitable spray lubricant. Tighten and adjust mounts to ensure secure smooth operation.
WARNINGS WHEN USED AS A SAFETY BARRIER Incorrect fitting or positioning of this safety barrier WARNING can be dangerous. WARNING Do not use the safety barrier if any components are damaged, missing or disassembled. Never install this product on glass doors or WARNING windows.
Page 5
WARNINGS WHEN USED AS A PLAYPEN This product is intended for use with children WARNING from 6 to 24 months or small to medium pets from 4.5kg (10 lbs) up to 18kg (40 lbs). WARNING Do not use the playpen without the PERMA Products play mat base.
SAFETY INFORMATION MOUNTINGS Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door frame, stair posts, etc.) is strong, rigid and has an even surface. Note: If using gate on stairs, it must be placed either on the top step or on the lowest step at the bottom.
Page 7
HARD WALL MOUNTING BRICK Drill 5mm (3/16’’) pilot holes, insert anchor and secure with screws. INSTALLATION Wood Screws Anchor HARD WALL MOUNTING CONCRETE Drill 5mm (3/16’’) pilot holes, insert anchor and secure with screws. TOOLS REQUIRED PHILLIPS HEAD PENCIL SCREW DRIVER DRILL This gate must only be fixed to a solid and secure surface.
WHAT’S IN THE BOX PARTS UNDERSIDE TOPSIDE Barrier Panels Gate Panel...
Page 9
Top Underside Top Topside Wall Bracket Wall Bracket Lower Wall Bracket Top Cap Bottom Cap Screws Corner Tubes If any parts are missing do not attempt to use your Playpen Barrier. Please contact us at www.permachildsafety.com/contact-us to obtain replacements. Only use parts supplied by the manufacturer with your Playpen Barrier.
INSTALLATION STEP 2: UNDERSIDE BRACKET WALL ASSEMBLY Place the Lower Wall Bracket over Corner Tube, and then put the Corner Tube into the Top Underside Wall Bracket. Put the Top Underside Wall Bracket into the top of the Barrier Panel, and the bottom into the bottom of the Barrier Panel, and then into the Bottom Cap.
Page 12
Mark screw hole positions with a pencil for the Top Underside Wall Bracket and the Lower Wall Bracket. Disassemble and screw in Top Underside Wall Bracket and Lower Wall Bracket.
Page 13
Reassemble gate panel by connecting the top of the Barrier Panel to the Top Underside Wall Bracket.
Page 14
Place the Corner Tube through the Lower Wall Bracket. Then place the Corner Tube into the Top Underside Wall Bracket. Pull the Corner Tube up so you can position the bottom of the Corner Tube into the bottom hole, and then into the Bottom Cap.
INSTALLATION STEP 3: TOPSIDE BRACKET WALL ASSEMBLY Place the Lower Wall Bracket over Corner Tube, and put the Top Cap on the bottom of the Barrier Panel. Place the Corner Tube into the Barrier Panel and then into the Top Topside Wall Bracket. Pull the Corner Tube up, while lifting the bottom into its position.
Page 16
Mark screw hole positions with a pencil for the Top Topside Wall Bracket and the Lower Wall Bracket. Disassemble and screw in Top Topside Wall Bracket and then screw in the Lower Wall Bracket.
Page 17
Place the Corner Tube through the Lower Wall Bracket and then push the Corner Tube through the top hole. Put the Top Cap on the bottom of the Barrier Panel, and then position the Corner Tube in place.
INSTALLATION STEP 4: ROOM DIVIDER OR SAFETY BARRIER Up to 9 panels including the gate may be used in open configurations providing the 2 end panels are securely fixed to a wall with the fixings provided.
Page 19
For larger openings add the #2748 Extra Wide Barrier to extend the barrier by an additional 3 panels. Individual panels are also available for order from our website, head to www.permachildsafety.com...
INSTALLATION STEP 5: TO ADD EXTRA PANELS Align opposite ends of panels, place the Corner Tube into the top hole first, then pull the Corner Tube up so you can position the bottom of the Corner Tube into the bottom hole. UNLOCKED LOCKED...
INSTALLATION STEP 6: REMOVE UNWANTED PANELS Turn base knob to the unlocked position, pull up on the Corner Tube and slide the bottom of the Corner Tube out from the base. With the Corner Tube removed you can lift and remove the unwanted panel.
INSTALLATION STEP 7: PLAYPEN ASSEMBLY Align the Gate Panel and one of the other panels together. Place the Corner Tube into the top hole first, pull the Corner Tube up so you can position the bottom of the Corner Tube into the bottom hole.
OPERATION HOW TO OPEN Using one hand place thumb on the button and grip gate with fingers. Slide button and lift gate, then open gate in either direction, when released gate will swing closed automatically. Always check gate is properly closed. To enable stay open feature, completely open gate to a 90°...
OPERATION SAFETY PLAY MAT (SOLD SEPARATELY) Note: A safety play mat is required if playpen is used with children. Your child’s play mat can now be placed into the playpen and secured to the bottom bars of each panel with the ties. The play mat is available separately, contact after sales support for details.
SUPPORT WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
WARRANTY CARD Details: Product Name: 3 in 1 Playpen Barrier White 2747, Warm Black 2752 (Please circle) Product Number: Your Name: Address: Phone: Email: Date of Purchase: Location of Purchase: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference.