Table of Contents
Related Manuals for GIGAMEDIA GGM KITWIFI2CB
Summary of Contents for GIGAMEDIA GGM KITWIFI2CB
- Page 1 VIDEOSURVEILLANCE USER GGM KITWIFI2CB MANUAL (NVR) Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. www.gigamedia.net...
-
Page 2: Table Of Contents
USER MANUAL Chapter 1 Safety Instruction ................4 Chapter 2 Product Overview................5 Rear Panel ......................5 1.2 Remote Controller (For Reference Only) ..............6 Chapter 3 WIRELESS NVR Common Operations ..........7 3.1 Using the Supplied Mouse ..................7 3.2 Using the Virtual Keyboard .................. - Page 3 USER MANUAL 5.6.4 Maintenance ....................38 5.6.5 System Information ..................43 Chapter 6 Search, Playback & Backup ............44 6.1 Event Search, Playback & Backup ............... 44 Chapter 7 Remote Access via Web Client ............47 7.1 Web Plugin Download and Installation ..............48 7.2 Web Client Manager ....................
-
Page 4: Chapter 1 Safety Instruction
USER MANUAL Chapter 1 Safety Instruction Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Power sources (note: please use the power supply attached or specified by the manufacturer) Never operate the equipment by using unspecified power supply. -
Page 5: Chapter 2 Product Overview
Chapter 2 Product Overview 1.1 Rear Panel Physical interface connection Power status light HDD status light HDMI Connect with HDMI display devices, such as PC monitor. LAN network interface mouse Connect USB mouse Storage Plug USB Disk Power port Connect attached the power supply Backup Plug USB Disk Micro SD... -
Page 6: Remote Controller (For Reference Only)
USER MANUAL 1.2 Remote Controller (For Reference Only) Icon Description Numeric keys Press to display channel 1~8 9、0 Numeric keys Press to display all channels Multiple display mode Menu Press to enter or exit the Main Menu Mute Mute On/off (not support this function) Submenu Go to submenu Up arrow key;... -
Page 7: Chapter 3 Wireless Nvr Common Operations
USER MANUAL Chapter 3 WIRELESS NVR Common Operations 3.1 Using the Supplied Mouse Left Button of Mouse Right Button of Mouse Click once to choose an item in the menus and confirm your Click once to open the pop-up selection. menu on the Live Viewing screen and to exit from the Click once upon a channel on Live Viewing screen to open... -
Page 8: Password
USER MANUAL 3.3 Password For the first time when you run the WIRELESS NVR, you must be required to set your own password immediately in order to protect your privacy. Please be sure to record your username and password and save them in a secure place. Language: Choose an OSD language New Admin name:... -
Page 9: Chapter 4 Wireless Nvr Starting Up
USER MANUAL Chapter 4 WIRELESS NVR Starting up 4.1 Startup Wizard Startup Wizard will help to configure the system and get the WIRELESS NVR works quickly. 4.1.1 Start Wizard Click the Start Wizard to proceed to the next step 4.1.2 Network Configuration If you connect to a router allows to use DHCP, please check the DHCP box. - Page 10 USER MANUAL Gateway: This address allows the WIRELESS NVR to access the Internet. The format of the Gateway address is the same as the IP Address. For example, “192.168.001.001”. DNS1/DNS2: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually should be enough just to enter the DNS1 server address.
-
Page 11: Date/Time
USER MANUAL 4.1.3 Date/Time This menu allows you to configure the Date, Time, Date Format, Time Format, Time Zone, NTP and DST. Date and Time Click on the calendar icon to set the current system date. Date: Click on the calendar icon to set the system date. Time: Click to set the system time. -
Page 12: Disk
USER MANUAL DST stands for Daylight Savings Time. DST: Enable if Daylight Saving Time (DST) is observed in your region Time Offset: Select the amount of time to offset for DST Time Mode: Choose to set the daylight saving time in weeks or in days Start Time/End Time: Set the start time and end time for daylight saving 4.1.4 Disk... -
Page 13: Resolution
USER MANUAL 4.1.5 Resolution Choose an output resolution matches to your monitor. The WIRELESS NVR supports to adjust the output resolution automatically to match the best resolution of your monitor when the system is starting up. 4.1.6 Mobile If your WIRELESS NVR come with a P2P ID, you can scan the QR code with your mobile app to view the WIRELESS NVR remotely. -
Page 14: Summary
USER MANUAL 4.1.7 Summary You can check the system summary information you had set in the start wizard and finish the wizard. Tick “Don't show this window next time" if you don’t want to display Start Wizard when system reboot next time. Click Finish button to save &... -
Page 15: Camera Quick Toolbar
USER MANUAL This indicates that the WIRELESS NVR is currently recording. If you installend HDD to NVR the indicates is show of Normal Recording, if not, the indicates isn’t show This icon appears when the camera has detected motion. This icon indicates that the HDD is in error to work This icon indicates the HDD is unformatted This icon indicates the HDD is full. -
Page 16: Start Menu
USER MANUAL 4.2.3 Start Menu With the start menu, you can switch user, search & playback, enter system setup menu, lock & unlock the screen, shut down, reboot & logout the system. To switch user. To enable multi-user, please view on 5.6.3 Multi-user. - Page 17 USER MANUAL Click the Shutdown button from Star Menu, and the check the further action you want to move. Click button, system will require to input the Admin password to authenticate. If you choose Logout the system, the live viewing screen will be disappeared. You will need to login the system for further operations.
-
Page 18: Chapter 5 Wireless Nvr System Setup
USER MANUAL Chapter 5 WIRELESS NVR System Setup You are able to configure the WIRELESS NVR for Channel, Record, Alarm, Network, Device & System from Start Menu Setup. -
Page 19: Channel
USER MANUAL 5.1 Channel In this section, you are allowed to configure the Wireless camera, live view display, manage Wireless cameras motion setup, Video Cover. 5.1.1 Channel This is changeless. Channel: Channel Name: You may edit the channel name Pair: Click the channel button to do pairing. -
Page 20: Record
USER MANUAL Camera Post Recording: 1. If you install HDD, the camera is connected the power , you may select Continuous option, or select 10s、20s、30s , default is 10s. record type will have a Normal Record and Motion Record 2. If you only install SD card, Not install HDD, Continuous option will not in the invalid, or the camera is not connect the power, you only select 10s、20s、30s, record type will have a Motion Audio:... -
Page 21: To Configure Record Schedule
USER MANUAL To configure Record Schedule 5.2.2 This menu allows you to specify when the WIRELESS NVR records video and define the recording mode for each channel. The recording schedule lets you set up a schedule like, daily and hourly by normal (continuous) recording, motion recording. To set the recording mode, click first on the mode radio button (Normal, Motion), then drag the cursor to mark the slots. -
Page 22: Alarm
USER MANUAL 5.3 Alarm This menu allows you to configure motion parameters. When motion has been detected by one or more cameras, your WIRELESS NVR will alert you to a potential threat at your home. It does this by sending you an email alert with an attached image from the camera to use as a reference (if this option is enabled) and/or sending push notifications via the mobile app. - Page 23 USER MANUAL Motion Detection Area: The whole screen is marked for motion detection (red blocks) as default. If you want to disable the motion detection on a certain area, click the grid cursor and then drag the mouse to highlight the scope to unmark the area into transparent blocks.
-
Page 24: Exception
USER MANUAL 5.3.2 Exception This menu allows you to set the type of events that you want the WIRELESS NVR to inform you. Type: Select the event type from below options: Event - No Space on Disk: When an HDD is full. - Disk Error: If the HDD is not detected properly. -
Page 25: Network
USER MANUAL 5.4 Network This menu allows you to configure network parameters, the most common types are DHCP. your network type is DHCP, unless the network is manually addressed. 5.4.1 General If you connect to a router allows to use DHCP, please check the DHCP box. - Page 26 USER MANUAL 5.4.1.1 Port Configuration Port: This is the port that you will use to log in remotely to the WIRELESS NVR (e.g. using the Web Client). If the default port 80 is already taken by other applications, please change it. Port: This is the port that the WIRELESS NVR will use to send information through.
-
Page 27: Ddns
USER MANUAL 5.4.2 DDNS This menu allows you to configure DDNS settings. The DDNS provides a static address to simplify remote connection to your WIRELESS NVR. To use the DDNS, you first need to open an account on the DDNS service provider’s web page. DDNS: Check to enable DDNS. -
Page 28: Email
USER MANUAL 5.4.3 Email This menu allows you to configure email settings. Please complete these settings if you want to receive the system notifications on your email when an alarm is triggered, HDD becomes full, HDD is in error state, or Video Loss occurs. 5.4.3.1 Email Configuration Email: Check to enable. -
Page 29: Device
USER MANUAL User Name: Enter your email address. Password: Enter the password of your email. Receiver 1~3: Enter the email address where you want to receive the event notifications from the WIRELESS NVR. Interval: Configure the length of the time interval between the notification emails from the WIRELESS NVR. -
Page 30: Disk
USER MANUAL 5. 5.1 Disk This menu allows you to check & configure the internal HDD(s). You need to format the HDD only at the first startup and if you replace a new HDD. HDD: Select the HDD you want to format and then click Format HDD. To start formatting, Format you need to enter your user name and password and then click OK to confirm to continue formatting. -
Page 31: System
USER MANUAL 5.6 System Change general system information such as date, time and region, edit passwords and permissions, and more. 5.6.1 General Device Name: Enter the desired name for your WIRELESS NVR. The name can include both letters and numbers. Device ID: Enter the desired ID for your WIRELESS NVR. - Page 32 USER MANUAL 5.6.1.1 Date and Time Date & Time Date: Click the calendar icon to change the date. Time: Click the dialogue box to change the time. Select the preferred date format. Date Format: Time Format: Select the preferred time format. Time Zone: Select a time zone relevant to your region or city.
- Page 33 USER MANUAL 5.6.1.3 DST Settings The DST (Daylight Saving Time) function allows you to select the amount of time that Daylight Saving has increased by in your particular time zone or region. Enable DST: If Daylight Saving applies to your time zone or region, check this option to enable. Time Offset: Select the amount of time that Daylight Saving has increased by in your time zone.
-
Page 34: Output Configuration
USER MANUAL 5.6.2 Output Configuration This menu allows you to configure video output parameters. Output: To choose the output options: Video LIVE-OUT: Is used to configure the main output parameters. 5.6.2.1 LIVE-OUT Choose LIVE-OUT from the Video Output drop-down menu. Output Resolution: Select a display resolution that is suitable for your TV. -
Page 35: Multi-User
USER MANUAL Scale: To adjust the size of the displayed screen by scale. X Offset: To move the displayed screen to left or right. Y Offset: To move the displayed screen to up or down. Click once or long press the left button of your mouse on the arrow to adjust the size and position, or you can scroll the wheel of the mouse to adjust. - Page 36 USER MANUAL 5.6.3.1 Changing Password To change the password for the administrator or user accounts, click the User Edit icon . The password has to be a minimum of 8 characters and can contain a mixture of numbers and letters. Enter your new password again to confirm, and then click Save to save your new password.
- Page 37 USER MANUAL Select one of the user accounts that is currently disabled, click the User Edit icon Select Enable from the drop-down next to User Enable. Click the field next to User Name to change the user name for the account. Select Enable from the drop-down next to...
-
Page 38: Maintenance
USER MANUAL 2. Check the boxes next to any system menus or capabilities you would like the user to access. Click to check all boxes. Click to check none of the boxes. Clear 3. Click to save your modifications. Save 5.6.4 Maintenance In this section, you will be able to search &... - Page 39 USER MANUAL 5.6.4.1 Log The system log shows you important system events, such as motion alarms and system warnings. You can easily create a backup file of the system log for a set time period to a USB flash drive. Log Searching and Backing Up: 1.
- Page 40 USER MANUAL 5.6.4.2 Load Default Reset the WIRELESS NVR settings to its out-of-box state. You can choose to reset all settings at once, or just settings on specific menus. Restoring default settings will not delete recordings and snapshots saved to the hard drive. Check the items you want restore, or check Select All to choose all items.
- Page 41 USER MANUAL 5.6.4.3 Upgrade 1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the WIRELESS NVR’s USB port. 2. Click Select File button to choose the firmware file in your USB flash drive, then Click OK. 3.
- Page 42 USER MANUAL 5.6.4.5 Auto Reboot This menu allows the system to auto reboot the WIRELESS NVR regularly. It is recommended to leave this function enabled, as it maintains the operational integrity of your WIRELESS NVR. Reboot: Check to enable. Auto Time: You can set the WIRELESS NVR to reboot by day, week or month...
-
Page 43: System Information
USER MANUAL 5.6.5 System Information This menu allows you to view the system information, channel information, record information & network status. 5.6.5.1 Information View system information such as device ID, device model name, IP address, MAC address, firmware version and more. If your WIRELESS NVR supports P2P function, you will find the P2P ID &... -
Page 44: Chapter 6 Search, Playback & Backup
USER MANUAL Chapter 6 Search, Playback & Backup The Search function gives you the ability to search for and play previously recorded videos as well as snapshots that are stored on your WIRELESS NVR’s hard drive. You have the choice of playing video that matches your recording schedule, manual recordings or motion events only. - Page 45 USER MANUAL Thumbnails view. You can view the snapshots of the events. Detailed view. You can view the details of the events. The events will be displayed in list. List view. In the detailed view mode, you can lock the video events to keep events from being overwritten in the hard drive.
- Page 46 USER MANUAL 6.2 External File The function is you can chose a playing video file into the USB Disk or SD Card to playbacke. Device Name: USB Disk or SD Card. File Type: you can select video format is *.*, *.rf , *.avi , *.mp4. Picture List, you can select the pictures here.
-
Page 47: Chapter 7 Remote Access Via Web Client
USER MANUAL Chapter 7 Remote Access via Web Client Use the Web Client to remotely access your WIRELESS NVR at any time via a PC. Before you access the Web Client, you need to ensure that the network settings of the WIRELESS NVR are configured properly. -
Page 48: Web Plugin Download And Installation
USER MANUAL Web Plugin Download and Installation To access the Web Client, do the following: IE/Chrome/Firefox: 1) Launch the explorer on your PC and enter the WIRELESS NVR static IP address or DDNS domain name (Host Name) you have set on WIRELESS NVR in the URL box. 2) For the first time you run the web client, system will require to install the web client plugin. - Page 49 USER MANUAL 3) After installing the plug-in, close & launch again your browser and repeat step 1 to open the login page. Input your user name and password to login the web client. Note : If you use Google Chrome, please use Version V41 or below. If you use V42 to V44, you need to enable NPAPI plugins.
- Page 50 USER MANUAL For Mac SAFARI: 1) Launch the Safari on your Mac, and enter the WIRELESS NVR static IP address or DDNS domain name (Host Name) you have set on WIRELESS NVR in the URL box. 2) Download the plug-in "SurveillanceCllient.dmg", locate the downloaded file and double click it. 3) Click on "Continue"...
-
Page 51: Web Client Manager
USER MANUAL 7.2 Web Client Manager The web client supports to full control the WIRELESS NVR with administrator account. Please make sure to protect your user name & password for preventing illegal login. 7.2.1 Live Interface This is the first screen that opens after you have logged in to the Web Client. Here you can open or close live preview, record video to local computer manually, take snapshots of the screens, color adjustment, etc. -
Page 52: Playback
USER MANUAL : Full screen : Manual Record ON or OFF : Manual Capture draw ON or OFF : Click to maximize the current window to full screen. Right click to popup menu option and select Exit Full Screen. : Sound ON or OFF and set sound volume . Use the buttons in the bottom-right corner of the menu to move between pages of system log events. - Page 53 USER MANUAL Timeline: Continuous recordings are shown with colored bars to represent different types of recording (legend shown in the bottom-right corner of the display). Green timline is Normal and Manual record, Yellow timeline is Motion record. 7. Playback control Toolbar: Detailed brief description is shown as below list Description Description...
- Page 54 USER MANUAL Record file download Click download icon on the control bar to display all the matched record file according to the search conditions of channels. Tick-select the record file you want to download and click [Start download] .System will download the record file in sequence and save to local PC.
-
Page 55: Remote Setting
USER MANUAL 7.3.3 Remote Setting Here you can remotely configure the settings of the NVR. Please see “Chapter 5 NVR System Setup” for more details on the NVR settings.. 7.3.4 Local Setting Record Path: Set the path to save manual recordings on your PC’s local drive. Download Path: Set the path on your PC’s local drive where you want to download recordings from the WIRELESS NVR. -
Page 56: Chapter 8 Appendix
USER MANUAL Chapter 8 Appendix 8.1 Troubleshooting Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and data cord and power cables are securely connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported by referring to the specifications or descriptions. -
Page 57: Usage Maintenance
USER MANUAL 12. Q: Why doesn’t dynamic detection work? A: Please check if the motion detection time and motion detection regional setting are correct and if the sensitivity is set too low. Q: Why doesn’t alarm work? A: Please check if the alarm setting, alarm connection and alarm input signals are correct. Q: Why does buzzer keep alarming? A: Please check the alarm setting, check if motion detection function is enabled and object motion is detected all the time is set as Always Off. -
Page 58: Accessories (For Reference Only)
USER MANUAL 8.3 Accessories (For reference only) Remote Controller Power Adapter Warranty Card USB mouse...
Need help?
Do you have a question about the GGM KITWIFI2CB and is the answer not in the manual?
Questions and answers