Whirlpool RCS3004R Dimensions And Installation Information

®
Electric Built-in Cooktop
PRODUCT MODEL NUMBERS
RCS2002R RCS3014R
RCS2012R RCS3614R
RCS3004R
Electrical: A 4-wire or 3-wire, single phase, 240
volt, 60 Hz., AC only electrical supply is required
on a separate, 40-amp circuit, fused on both sides
of the line.
NOTE: The 15" (38.1 cm) model series requires a
20-amp circuit.
CABINET OPENING DIMENSIONS
A
C
L
K
J
A. 21" (53.3 cm) on 21" (53.3 cm) models; 30" (76.2 cm) models on
30" (76.2 cm) models; 36" (91.4 cm) on 36" (91.4 cm) models
B. Combustible area above countertop (shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of unprotected wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is protected
by not less than ¹⁄₄" [0.6 cm] flame retardant millboard covered with
not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless
steel or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
D. 13" (33 cm) recommended upper cabinet depth
E. 3" (7.6 cm)
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
OVERALL DIMENSIONS
A
D
B
F G
E
H
H
I
B
A. 21" (53.3 cm)
B. 30" (76.2 cm)
36" (91.4 cm)
C. ³⁄₄" (1.9 cm)
D. 2⁷⁄₈" (7.3 cm)
A
For 21" (53.3 cm) model only:
rear of cabinet or
rear wall under
countertop
F. 15¹⁄₂" (34.4 cm) on 21" (53.3 cm) models; 18⁵⁄₈" (45.7 cm) on
30" (76.2 cm) models and 36" (91.4 cm) models
G. 18" (45.7 cm) minimum clearance from upper cabinet to
countertop within minimum horizontal clearances to cooktop
H. Junction box or outlet; 12" (30.5 cm) minimum from bottom of
countertop; 10" (25.4 cm) from right side of cabinet
I. 18⁵⁄₈" (33.7 cm) on 21" (53.3 cm) models; 28⁷⁄₈" (47.3 cm) on
30" (76.2 cm) models; 35" (90.2 cm) on 36" (91.4 cm) models
J. 1" (2.5 cm) minimum distance to nearest left and right side
combustible surface above cooktop
K. 1⁵⁄₁₆" (3.4 cm) max. counter thickness on 21" (53.3 cm) models. See
following illustration.
L. 1" (2.5 cm) minimum clearance between back wall and countertop
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
C
D
B
D
A. 16¹⁄₂" (41.9 cm)
B. 21" (53.3 cm)
C. 18" (47.7 cm) overall
D. 2⁷⁄₈" (7.3 cm)
back edge
of cutout
B
A
A. ¹¹⁄₁₆" (1.7 cm) min.
⁵⁄₁₆
B. 1 " (3.4 cm) max.
C
Ref. 8286310
08-10-05