Open Source Software Notice Information; Troubleshooting - LG 32LW340C Easy Setup Manual

Hide thumbs Also See for 32LW340C:
Table of Contents

Advertisement

Available languages

Available languages

VOL
PORTAL
MUTE
SETTINGS
GUIDE Q.MENU
OK
INFO
RATIO
B
Accesses the settings.
Displays the program event according to time
scheduler.
Accesses the quick menu.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
Selects menus or options and confirms your input.
(Back) Returns to the previous screen.
Shows information on the current program.
Clears all on-screen displays and returns to TV
viewing.
Color buttons These access special functions in some
menus. (
Red,
Green,
,
, , ,
Control buttons for media contents
Accesses the AV devices connected to the TV.
Opens the SIMPLINK menu.
Resizes an image.
12
P
CH
A
G
E
B
EXIT
Yellow,
Blue)
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
http://opensource.lge.com.
product, please visit
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and
handling) upon email request to
This offer is valid for three (3) years from the date on
which you purchased the product.

Troubleshooting

The software may be updated for improvement in
performance. The customer is responsible to ensure the
compatibility of their equipment with any LG Electronics
software. If needed, please consult with LG Electronics
and update new software versions according to the
guidance provided by LG Electronics.
• Cannot control the TV with the remote control.
- Check if anything such as tape has been placed over
the receiver.
- Check if there is any obstacle between the product
and the remote control.
- Replace the batteries with new fresh ones.
• No image display and no sound is produced.
- Check if the product is turned on.
- Check if the power cord is connected to a wall outlet.
- Check if there is a problem in the wall outlet by
connecting other products.
• The TV turns off suddenly.
- Check the power control settings.
The power supply may be interrupted.
- Check if the Off Time / Sleep Timer feature is
activated in the TIME settings.
- If there is no signal while the TV is on, the TV will turn
off automatically after 15 minutes of inactivity.
opensource@lge.com.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents