Summary of Contents for INAZUMA HD PRO 50.000 V2
- Page 1 Installation and Operating Instructions INAZUMA HD PRO 50.000 High-Performance Duo UVC Lamp Vers. 1.04 – 2019/04...
-
Page 2: Table Of Contents
Inhaltsverzeichnis General information ...........................3 1.1. Introduction ............................3 1.2. Warning labels ............................3 1.3. Safety notes and warnings .........................3 1.4. Additional safety instructions ......................3 1.5. EAR-Registrierung ..........................4 1.6. WEEE-registration ..........................4 1.7. Alteration and modification .......................4 1.8. Spare parts ............................4 1.9. Description and function of the product ..................4 1.10. -
Page 3: General Information
Always pull the mains plug during maintenance mechanisms and must therefore be operat- (e.g. changing of the illuminant or cleaning of the ed in Inazuma drum filter systems only. quartz tube). The mains plug may only be plugged into the The immersion-UVC must be protected from WebCSA control. -
Page 4: Ear-Registrierung
We point out that every alteration or modifica- The liability is limited to the replacement of the tion without written approval by Inazuma or one defective device. of its authorized suppliers will cause the immedi- ate annulment of the CE conformity assessment. -
Page 5: Installation And Maintenance
. i n a z u m a - o n l i n e . c o m 2. Installation and maintenance 2.3. Mounting in the drum filter 2.1. Notes on installation and maintenance All Inazuma drum filters of the MK VI • The device can only be installed and series have one or... -
Page 6: Replacement Of The Uvc Illuminant
2.4. Replacement of the UVC illuminant (Art. No. IK4010) ATTENTION! Electric hazard! Always disconnect the device from the power supply in order to change the illuminant or quartz tube. In order to protect the UVC emitter from possible breakage, you should protect it with a cloth or foam when replacing the illuminant or the quartz tube and carry out the work in a safe workplace. -
Page 7: Replacement Of The Quartz Tube
w w w . i n a z u m a - o n l i n e . c o m 2.5. Replacement of the quartz tube (Art. No. IK4020) ATTENTION! Electric hazard! Always disconnect the device from the power supply in order to change the illuminant or quartz tube. - Page 8 Eisackstraße 16 86165 Augsburg Tel.: +49 821/ 72 91 97 2 Fax: +49 821 / 72 91 97 3 Email: info @inazuma-online .com Web: www. inazuma-online .com Technical modifications and errors excepted. WEEE-Reg.-Nr. DE 19429673 Manual Version 1.04 – 2019/04...