Insignia NS-HW550 Quick Setup Manual

V1
FINAL
FOR PRINT
NS-HW550_18-0521_QSG_V1_EN.ai 1 11/12/2018 2:29:41 PM NS-HW550_18-0521_QSG_V1_EN.ai 1 11/12/2018 2:29:41 PM
QUICK SETUP GUIDE
Slimline Metal
Surge Protector
NS-HW550
PACKAGE CONTENTS
• Surge protector
• Quick Setup Guide
FEATURES
• Slim metal housing fits into tight spaces while
providing maximum durability
• 540 J rating protects your electronics from
power surges
• Eight wide-spaced outlets easily fit large plugs
• Two USB ports (2.4A total output) provide
additional power options
• 6 ft (1.8 m) heavy-duty cord reaches where
you need it
• Circuit breaker with status light protects from
power overloads
• Integrated mounting bracket lets you easily
attach to a wall, furniture, or other surfaces
Before using your new product, please read these instructions to prevent any damage.
Final flat size: 10.5 × 10 in. (266.7 × 254 mm)
Final fold size: 3.5 × 10 in. (88.9 × 254 mm)
OVERVIEW
AC outlets
USB ports
Mounting holes
USING YOUR SURGE PROTECTOR
1 Plug your surge protector into a standard
(125V) wall outlet. If the protected LED
indicator doesn't light, make sure that the
power switch is in the ON position.
The power switch is inside a button cover to
prevent the switch from accidentally turning
on or off. To open the cover, firmly grasp the
flap on the cover and pull up on the bottom
corner (on the side closest to the top power
outlet). To close the cover, push it down until it
clicks into place. For your safety, do not use a
metal object to open the cover.
2 Plug up to eight devices into the surge
protector's outlets. You may need to push
firmly to insert the plug.
3 If needed, mount your surge protector using
the mounting holes located on both ends of
the surge protector.
Power cord
Power switch with button cover
Protected LED indicator
UNDERSTANDING LED INDICATORS
• Protected LED indicator: Lights to show
that your devices are protected from power
surges. If this LED doesn't light, your surge
protector cannot absorb additional power
surges, and you need to replace your surge
protector.
Mounting
holes