WARNING: Do not attempt to operate the machine until you have read thoroughly and understood completely all instructions, rules, etc. contained in this manual. Failure to comply may result in accidents involving fire, electric shock, or serious personal injury. Keep this owner's manual and review frequently for continuous safe operation. Technical data Voltage/frequency 220-240v ~ 50 Hz...
Safety Rules Wear Eye Protection Wear Ear Protection As with all machines, there is a certain amount of hazard involved with the use of this dust extractor. Use the machine with the respect and caution demanded where safety precautions are concerned. When normal safety precautions are overlooked or ignored personal injury to the operator can result.
Page 4
Adjustments Make all adjustments to the machine and operational setup with the power off. Job Completion If the operator leaves the machine area for any reason, he should turn off the power supply to the dust extractor. Drugs, Alcohol, Medication Do not operate this machine while under the influence of drugs, alcohol, or any medication.
Page 5
Assembly Instructions For packaging reasons this machine is not entirely assembled. Remove the extractor from the carton, remove the lid and motor unit to access the items stored inside the drum. Inside the drum you will find the following components: A –...
Page 6
Fold any overhanging bag into the inside of the filter. Push the filter cartridge onto the motor casing, trapping the filter bag in position.
Page 7
Place the complete motor casing, lid and filter back onto the collector drum and secure in place with the locking strap. Connect the hose using the 100mm hose clip and tighten with a 10mm spanner or socket. Your Dust Extractor is now ready for use.
The Switch has 3 positions: On / Off / Auto The dust extractor can be operated manually by moving the switch between the Off and On positions. When Auto is selected, the extractor will start when it detects the power draw from the power tool.
Maintenance Before any type of maintenance is carried out, the extractor should be disconnected from the power supply. Emptying the drum: The drum should be emptied when it is around 2/3rds full. If performance of the extractor deteriorates, it may be because the drum is too full. Wait for a few seconds for dust to settle, then undo the lid locking strap.
Declaration of Conformity for CE Marking Charnwood Declare that Suction Cleaning Device, Model DC50AUTO Conforms with the following Directives: Machinery Directive 2006/42/EC And further conforms to the machinery example for which the EC type examination Certificate No. 50074570 has been issued by TUV Rheinland LGA Products Gmbh, Tillystrasse 2, 90431 Nurnberg, Germany.
Page 11
Charnwood DC50-AUTO Parts List Part No. Description Part No. Description Power Cord and Plug Cord Sleeve On/Off Switch Left Motor Cover Strain Relief Plate Philips Screw M4 x 10 Lock Nut M5 Philips Screw M5 x 25 Philips Screw M5 x 45...
Page 12
Last Updated: May 2020 Charnwood, Cedar Court, Walker Road, Hilltop Industrial Estate, Bardon Hill, Leicestershire, LE67 1TU Tel. 01530 516 926 Fax. 01530 516 929 email: sales@charnwood.net website: www.charnwood.net...