Advertisement
GETTING STARTED
Thank you for choosing the Prism 3D LED Art Panels by Monster
Smart Illuminessence. This Design Guide will help you with
creating the design of your Prism pattern.
Please consult the Quick Start Guide for all setup and
installation instructions.
DESIGN TIPS
•
To ensure all panels light up, make sure all the connectors
always point GREEN side AWAY from the controller.
RED always
points TOWARDS
controller
• Only one
GREEN
panel at a time (but it can be connected to any port).
• Pointing the directional markers on the back of each panel
towards or away from each other will create di erent lighting
e ects when panels are combined (colors used for reference).
• Thanks to the geometry of the mounting bracket, you can remove,
rotate, and replace a panel at any time during or after installation .
• For best results, position the controller somewhere on the left
or the bottom of your pattern.
• Plan to install your Prism near enough to a power outlet for the
adapter cord to reach - ensure it is not a tripping hazard.
• Save these instructions for future reference.
side should ever be connected to any one
GREEN always
points AWAY
from controller
1
Advertisement
