Installation Guide for Cisco TelePresence SX20 Quick Set
Connecting the cables
Connect all cables as illustrated.
Make sure all units are switched off when connecting or
If connecting an external loudspeaker, please take care to use an
active speaker (built-in amplifier). Use an ungrounded (floating)
speaker to avoid ground loop noise.
Connect one or two microphones to your codec.
We recommend Cisco Table Microphone 20 or
Cisco TelePresence Ceiling Microphone.
Connect the codec to LAN/Ethernet.
Connect your primary display to the blue colored HDMI socket.
With the dual display option, connect the second display to the
other HDMI output.
Connect your camera (option A or B, or a third-party camera) to
Connect a PC (video and audio) to be able to share presentations
(locally, or with remote participants).
Always use the provided power supply:
y FSP FSP060-DIBAN2
Starting to use the system
If the codec is not starting automatically, press the power button
to switch it on. When the button lights steadily the system is
ready for configuration. This may take a few minutes.
Follow the instructions on screen:
y Cisco Webex: To find more information on how to get started, visit
and look for Getting Started
articles for room devices.
y Other services: For further information on set-up and
configuration, download the Getting Started Guide from
78-100554-03A0 | 2018 MAY | © 2018 Cisco Systems, Inc. All rights reserved.
Camera option A:
PrecisionHD 1080p 12X
Camera option B:
Do not block any ventilation openings;
minimum 8 cm / 3.15 in. free space.