Advertisement
Quick Links
Advertisement
Summary of Contents for Over The Edge Breakdown Stand
- Page 1 Breakdown Stand Assembly Instructions Presented by Over The Edge and Aquariumframeswholesale.com...
- Page 2 NOTE • Please read all instructions before assembling your stand • If you have any questions after reading through these instructions, please contact us via phone at (810) 724-0961 or email overtheedge2010@gmail.com...
-
Page 3: Tools Needed
Tools Needed • Rubber Mallet • Large Phillips Head Screwdriver • 7/16 Wrench... - Page 4 Step 1 • Lay out pieces as shown here • Note location of zip ties outlined in Red. • DO not remove ties until instructed to do so...
- Page 5 Step 2 Set piece marked “top rack” so that words “Top Rack” are facing upwards as shown...
- Page 6 Step 3 Remove zip ties (outlined in red) from Top Rack and leg...
- Page 7 Step 4 • Insert leg into top rack • Holes in leg and top rack should line up • You may have to tap leg into place using rubber mallet...
- Page 8 Step 5 • Insert Nuts and Bolts into leg brackets and slightly tighten...
- Page 9 Step 6 • Repeat steps 3 through 5 for other leg. • After installing other leg, your stand should be as shown below...
- Page 10 Step 7 • After installing both legs, flip stand so that it is standing upright, as shown...
- Page 11 Step 8 Set piece marked bottom rack so zip ties are on same side as the leg as shown in picture below marked in red...
- Page 12 Step 9 • Flip over piece marked bottom rack so that words “Bottom rack” are facing downwards as marked in red Below...
- Page 13 Step 10 • Insert bottom rack between the legs...
- Page 14 Step 11 Inserts bolts into bottom rack. There should be 2 bolts in each side of stand as shown below...
- Page 15 Step 12 • Tighten all 8 bolts on the top and bottom of the stand as shown here...
- Page 16 Your Stand is Complete! • Congratulations you have just assembled your own breakdown aquarium stand...
Need help?
Do you have a question about the Breakdown Stand and is the answer not in the manual?
Questions and answers