Corsair VOID ELITE SURROUND Quick Start Manual page 3

ENGLISH
CONTROLS AND FEATURES
A Headband adjustment
B
Cantilevered arm + hinge
C
Mute button
D
Volume control
E
F
G
1
E 7.1 surround sound USB adapter
F Microfiber covered ear pads
G Microphone foam windscreen (removable)
A
B
C
D
GETTING STARTED WITH YOUR VOID ELITE SURROUND HEADSET
VOID ELITE SURROUND is a multi-platform headset that operates in two audio modes:
stereo and 7.1 surround sound.
> In stereo mode, you can connect the 3.5mm audio jack into any PC, Mac, PlayStation 4, XBOX One*,
Nintendo Switch or mobile device.
> The included 7.1 surround sound USB adapter enables surround sound on PC.
* May require Microsoft adapter sold separately.
If using headset on PC, go to corsair.com/support/downloads to download the iCUE Software. Using the iCUE
software will enable the full feature set of your headset.
NOTE: If the headset is used without software, some features will be disabled.
> Install the iCUE software on a PC running Windows 7, Windows 8.1, Windows 10 or later.
> After installation is complete, reboot your PC, and launch iCUE.
iCUE SOFTWARE CAN BE USED TO
> Select and customize audio equalizer (EQ) settings.
> Adjust microphone input volume and microphone side tone.
> Set 7.1 surround sound on or off.
NOTE: Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and
always begin with the volume at the lowest possible level before increasing.
ENGLISH
2