Table of Contents
Advertisement
OPERATIONS
• To replace the filter, press the
to switch to OFF mode.
• Hold the filter cover and rotate counterclockwise to
separate the cover. Pull out the HYGIENE FRESH /
filter inserted inside the filter cover.
How to install the new filter
• Insert the new HYGIENE FRESH filter in the separated
filter cover so that the hooks around the filter are visible.
(If the filter is inserted in reverse direction, it will not be
assembled.)
• Insert the filter cover to its original position and then turn
clockwise by 30 degrees to lock the filter cover.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
Set replacement timing (Initialization)
After the user replaces the filter, the user can set the
time for the next replacement.
• Close the refrigerator door and press the
button on the display panel on the front side of the
door for more than 5 seconds to check that the
RESET lamp on the display panel is turned off.
Switch over to use mode
Switch over to use mode.
• To use the HYGIENE FRESH filter, press the
the front side of the door and switch over to the AUTO or POWER mode.
(Whenever you press the button, the HYGIENE FRESH filter will be switched to OFF
POWER
OFF.)
CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Open the
door to check whether the LED around the filter is also turned on. Do not put in your finger or alien
particles inside the fan. It can be caused of an injury or malfunction.
CAUTION
• Do not wash the HYGIENE FRESH filter by using water because It can be
caused of malfunction.
• If the user continuously use the filter after the time to RESET, It can be caused of malfunction.
• This filter may not be effective for all types of bacteria and virus.
• This is effective to remove the bacteria which is not on the food in the refrigerator.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
button
OFF
AUTO
button on the display panel on
POWER
21
During use notify
When switched
time to RESET
over to OFF mode
AUTO
OFF
Advertisement
Table of Contents
