Page 2
User manual PowerXtreme XC3 charger Dear customer, Thank you for purchasing the high quality PowerXtreme XC3 charger from PowerXtreme! This product has been developed using the most modern technologies and quality systems. We assure you that we make every effort to ensure trouble-free operation so that you are happy with your purchase. Our ultimate goal is a satisfied customer.
The PowerXtreme XC3 charger will limit the charging current to a maximum of 3.1A to avoid overloading the cabling. The PowerXtreme XC3 charger also ensures that no current can flow from the on-board battery to the starter battery.
▪ Use cables with the correct cross-section and keep the cable connections as short as possible. Use the supplied flat plugs and check whether they clamp properly; ▪ Do not place the PowerXtreme XC3 charger in a high temperature environment or in direct sun or with a heat source > 45 ° C;...
When the incoming voltage will go under 11.2 V or 12.8 V, the charging process stops to prevent the source battery being discharged too deep (depending on the settings). When mounting the PowerXtreme XC3 charger, choose a place that is dry and clean; ▪...
User manual PowerXtreme XC3 charger 4. Specifications techniques Spécifications Lead Lead On-board Type of battery LiFePO4 Lead (low) (high) Lead (low) (high) battery Article number EM010003 EM010061 EM010063 EM010064 EM010005 EM010006 EM010116 Voltage input range 12-20 VDC Cut off voltage...
6. Warranty conditions EmergoPlus guarantees that the PowerXtreme XC3 charger is built according to the legally applicable standards and regulations. During production and before delivery all PowerXtreme XC3 charger have been extensively tested and checked.
User manual PowerXtreme XC3 charger 8. EG Declaration of Conformity EG DECLARATION OF CONFORMITY OF ELECTRICAL EQUIPMENT Declaration according to Directive 2014/35 / EC, as amended This language version of the statement is checked by the manufacturer (original statement). Name...
Need help?
Do you have a question about the XC3 and is the answer not in the manual?
Questions and answers