Advertisement
If the configuration fails, the reasons may be:
1.Router password is wrong. Please click [Retry] and check
the password.
2.The router's network signal is weak, and the logger is too far
away from the router. Please put the router closer to the
logger or use a repeater.
3.Click too fast during the Logger's AP connection.Please wait
a few seconds and then jump to the con guration after
Logger's AP is connected.
If you encounter following situations, please recon gure
logger network:
1. Change router
2. Change WIFI password
3. Change router's SSID
4. Enterprice routers may restrict WIFI connectivity.
CANADIAN SOLAR (USA), INC.
3000 Oak Road, Suite 400, Walnut Creek, CA 94597, USA | www.canadiansolar.com
12
Advertisement
