AMBI SPHERE Wikinger 6X12m Quick Start Manual

Advertisement

Quick Links

Part list

1
Oval corner leg
2
3
Diagonal 25mm
4
Top strength pipe male
5
Top strength pipe female
Top oval corner extension
6
7
Oval corner arch
8
Oval middle arch
Horizontal connection pipe
9
female
Horizontal connection pipe
10
11
Round pipe 25mm 1400mm
12
6X12M TENT
Oval leg
pipe
male
Fasten bar
Foot
10x305mm
Floor Bracket
Spiral peg
1
quantity
18
18
16
9
9
18
18
9
99
11
16
22
16
8
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wikinger 6X12m and is the answer not in the manual?

Questions and answers

Summary of Contents for AMBI SPHERE Wikinger 6X12m

  • Page 1 6X12M TENT Part list quantity Oval corner leg Oval leg Diagonal 25mm Top strength pipe male Top strength pipe female Top oval corner extension pipe Oval corner arch Oval middle arch Horizontal connection pipe female Horizontal connection pipe male Fasten bar Round pipe 25mm 1400mm Foot 10x305mm...
  • Page 2 1.75’’ screw 2.5’’ screw 4" Screw 4.5" Screw Wing nut Spancer Bolt with nut 8x50mm Zinc strap Tie-down kit 6x180mm 8x300mm Bungee Supper stake Roof Door...
  • Page 3 Frame assembly instruction Attention Please use gloves when assembling , the metal frame portion of this unit. The metal components of this products have been treated, with a rust preventive coating that may feel oily to the touch. This coating is not dangerous, but may dirty your hands during assembly.
  • Page 4 B. Contact this two arches together by cross bar no.10 and no.9 like below ,no 9 is for add-on section, with 4 inches screws C .Attach the extension bar to the center arch and fix the ceiling rail to extension bar(No.6 and 11) , Use screw 1.75” to connect No.4 and 5.
  • Page 5 E. Connect the corner arch by cross bar pipe no. 10 and no. 9 with screw (screw 4”). Still , no. 9 is for add-on sections . F. Insert leg No.1 and No.2 in to the corner arch .And connect them by cross bar no.10 and no.9 with screws (4” screw ).
  • Page 6 To Spread the cover over the frame. Please pay attention to all sharp edges and potential harm to the cover. Insert pipe No.11 into the bucket at the bottom of the roof .Fasten it with strap,like below picture. Fasten the roof to the structure and by fix it ground with tie down kit .

Table of Contents