Download
Share
Print this page
Bizhub FS-603 Installation Manual
  1. Manuals
  2. Brands
  3. Bizhub Manuals
  4. Finishers
  5. FS-603
  6. Installation manual

Bizhub FS-603 Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
INSTALLATION MANUAL
FS-603
Finisher
Applied Machine:
for Product Code 4037
NOTE
• Before installing, be sure to unplug the power cord of the machine.
• Keep all packing materials out of the reach of children.
4583-7731-01

Advertisement

loading
Need help?

Need help?

Do you have a question about the FS-603 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bizhub FS-603

  • Page 1 INSTALLATION MANUAL FS-603 Finisher Applied Machine: for Product Code 4037 NOTE • Before installing, be sure to unplug the power cord of the machine. • Keep all packing materials out of the reach of children. 4583-7731-01...

  • Page 2: Unpacking The Finisher

    FS-603 ■ Before Installing the Finisher ■ Unpacking the Finisher In order to adjust the height of the machine to the height of the finisher, the Paper Feed 1. Check that the following accessories are available in the box. Cabinet PC-102, or PC-202, or PC-402, or Desk must be installed.

  • Page 3: Installing The Accessories

    FS-603 ■ Installing the Accessories 2. Remove protective tape and packing materials from different parts of the finisher. 1. Peel off the seal covering the area where the Tape stabilizing pin and magnet plate will be attached. 4583U016AA 2. Attach the enclosed stabilizing pin and magnet plate with the enclosed screws C to the left side of the machine as shown.

  • Page 4: Installing The Rail

    FS-603 ■ Installing the Horizontal Transport Unit ■ Installing the Rail 1. Remove the protective tape. 1. Insert the rail into the Rail guide. 2. Protrude the leading edge of the rail out about 60 mm to the right from the right end of the machine.
  • Page 5 FS-603 ■ Adjusting Height and Correct Alignment 5. Secure the finisher rail in position using screw B (one screw). 1. Gently move the finisher toward the machine and check for following. • Is the positioning pin aligned with the hole in the finisher? •...
  • Page 6 FS-603 ■ Installing the Staple Cartridge 4. Loosen the two caster fixing screws (at four places). 1. Open the front door and slide out the staple unit. 2. Remove the staple cartridge from its protective bag. 3. Insert the staple cartridge into position until a click is heard.
  • Page 7 FS-603 ■ Adjusting the Staple Position and Fold Position 9. Check for any deviation between the stapled position and the newly folded crease. <Adjusting Center-Staple Position> NOTE 1. Load the drawer with A3 or Ledger paper. Use the newly folded crease, not the machine-folded one, for the check.
  • Page 8 FS-603 <Adjusting Fold-Position> 8. Check for any deviation between the stapled position and the folded crease. 1. Display the basic screen. Call the copy page facing up A and the that facing down B. 2. Select the functions as follows: Fold & Staple→Yes.
  • Page 9 FS-603 ■ Affixing the Labels Affix the labels to the position shown below. Label for Machine Label for ADF 4698U110AA 4698U109AA for Machine for ADF 4698U107AA – 8 –...