Download Print this page

Hisselektronik Safeline 2000 Light Manual For Programmering

Advertisement

Quick Links

Ver 1.2
Eng
Manual for
Programmering
Safeline 2000 L
ight
Hisselektronik AB www.hisselektronik.se
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the Safeline 2000 Light and is the answer not in the manual?

Questions and answers

Summary of Contents for Hisselektronik Safeline 2000 Light

  • Page 1 Ver 1.2 Manual for Programmering Safeline 2000 L ight Hisselektronik AB www.hisselektronik.se - 1 -...
  • Page 2 The LED placed between the microphone and speaker indicates: When blinking 1sec on 5sec off: mic/ loudspeaker is working. If solid red light: a call is connected (line is busy). Hisselektronik AB Antennvägen 10 13548 TYRESÖ Tel. 08-4477932 Fax. 08-4477931...
  • Page 3 Is there any alarm code programmed? - Check with the hand unit. Is it calling the right number? - Check by calling on a regular phone. Has the alarm-receiving operator the right equipment? - Check with the operator. Hisselektronik AB Antennvägen 10 13548 TYRESÖ...
  • Page 4 Programming: To program the telephone a programming unit HT99-H is needed. It is also possible to program the telephone by using a dialtone telephone. Programming with Safeline Hand Unit It is possible to register all alarm codes and telephone numbers before programming the telephone. The hand unit is battery powered and saves all codes and numbers in the memory, even if the power is turned off or the battery is changed.
  • Page 5 Example on how to simplify the programming: On recurrence programming only the alarm-codes need to be changed. If battery alarm is not used, only alarm-code 1 is needed. Step by step… The display shows: Explanation: Next to do: Tip: Handunit for Safeline 1000/2000 After about 3 seconds the next text will show.
  • Page 6 Safeline 2000-Light: Programming from a dialtone telephone: It is possible to program the telephone by calling to it. By using different dialtone commands it is possible to program all codes and telephone numbers to the telephone. This is how to do it: If only one telephone is connected to the line: Call the lift telephone.
  • Page 7 Dial *21*1# to change the alarm type on the primary number to "Voice". The lift telephone answers with "OK". Dial *00*# to discontinue programming. The lift telephone answers with "OK". The telephone is now ready to be used with its new settings. Hisselektronik AB Antennvägen 10 13548 TYRESÖ Tel. 08-4477932 Fax.