Removing the cover
10. Press the release button in the middle the harness buckle to disconnect.
11. Remove waist belt from harness connectors.
12. Pull belts out through button holes in seat cover. The cover can now be easily
taken off the seat for cleaning or replacing.
13. To replace seat cover, repeat steps 10 - 12 in reverse.
1. Sit you child in the chair after assembling.
2. Fasten harness buckles
3. Tighten waist and shoulder belts to appropriate length.
4. Attach adjustable tray.
independently.
3. Do not use until all parts are correctly assembled & adjusted.
5. Always secure the child in the restraint with the harness supplied
to prevent serious injury or death from falls or sliding out. Never leave
child without adult attendance.
6. Do not alter or modify this product.
7. Always use on a level secure surface.
8. Ensure all four legs of the low-chair are inserted correctly and sit level.
INFA SECURE PTY LTD P.O. Box 487, Emu Plains NSW 2750, 110-114 Old Bathurst Rd,
Emu Plains 2750 Service No: 02 4728 8090 Fax: 02 4728 8040 www.infa-secure.com.au
missing or faulty in anyway.
588
FEED 'N' READ
4 i n 1 h i /l o w - c h a i r
INSTRUCTION MANUAL