sugar-valley STATION Installation Manual

Advertisement

Quick Links

station
INSTALLATION GUIDE
1
DESCRIPTION
Station is a complete pool controller which doses pool-
chemicals in order to maintain the pool water in perfect
conditions. The base product controls the temperature,
filtration periods, pool lighting and 4 additional
relays. The base product is upgraded by adding the
measurement and control of up to 4 water parameters.
The management of the additional parameters can also
be upgraded post-sales via "upgrade kits".
Electrical connections of the electronic box
Cover
FL1
Chlorine probe
detector (rotameter)
Conductivity probe
Temperature probe
pH
AUX 1
pH Control
Base (pump)*
* An "Installer Menu" does exist for advanced functions. If you are an authorized installer, please ask your provider for the installers/service manual.
2

SYSTEM INSTALLATION

8
8
9
10
* Filtration control by external timer
Filtration mode:
"Manual/ON"
110-230 V
110-230 V
max. 3.15 A
N
A1 A2
14
12
AUX 2
FILTER PUMP
redoX / free chlorine
Filtration control
ppm´s (pump)*
1
16
4
6
5
15
B
* Filtration control by internal timer
Relay FILTER PUMP
!
NEW
MODEL
2015
FAN
LESS
Electronic box
DRY CONTACT
redoX
Free
Chlorine
L
11
LIGHT
Lighting control
17
A
C
Filtration mode:
See section 3.2
110-230 V
PORTABLE
WORLDWIDE
COLOR
REMOTE
DISPLAY
CONTROL
(TFT)
UP TO
UPGRADE
4
POSSIBLE
PARAMETERS
Main connection 220 V
1
ON/OFF switch
2
3
Fuse for device and
2
3
cell 3.15 A
1
4
Fuse relays 3.15 A
4
110-230 V
Device control SLAVE
Digital inputs /
outputs
Connection
WIFI / RS module
Connection display
pH
AUX 3
AUX 4
Heating control*
Filtration pump timer *
A
Silex / glass / diatom filter
B
C
Recirculation pump
1
Electronic box
4
pH probe
(optional - for models with pH control)
redoX probe
5
(optional - for models with redoX control)
6
Conductivity probe
(optional - for models with conductivity control)
Acid dosing pump
8
(optional - for models with pH control)
Acid injector
9
(optional - for models with pH control)
10
Hydrochloric acid container
(optional, for models with pH control,
not supplied with unit)
15
Other pool equipment
16
Module RF or RF/WIFI or WIFI
17
Free chlorine control
WIFI and
MODBUS
FILTRATION
AND LIGHT
CONTROLS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STATION and is the answer not in the manual?

Questions and answers

Summary of Contents for sugar-valley STATION

  • Page 1 POSSIBLE CONTROLS PARAMETERS DESCRIPTION Electronic box Station is a complete pool controller which doses pool- Main connection 220 V chemicals in order to maintain the pool water in perfect ON/OFF switch conditions. The base product controls the temperature, filtration periods, pool lighting and 4 additional Fuse for device and relays.
  • Page 2 Optional automatic controls pH control redoX control Free chlorine control Conductivity Temperature Flow detector Metering and control Metering and control of Metering and control in Metering and control of Temperature probe Mechanic security of the pH of the water. the redoX as check value ppm of the free chlorine the conductivity of the 0 - 100°...
  • Page 3 3.2 Filtration 2.1 Filtration modes 2.2 Manual: Filtration can be switched ON and OFF manually. 2.3 Automatic (or with timer): In this mode the filtration switches ON/OFF according to 3 timers. The timers always work on daily bases. 2.4 Smart*: This mode uses, as a basis, the automatic or timer mode, with its 3 intervals of filtration, but adjusting the filtration time in function of the water temperature.
  • Page 4 The redoX value advises us of the oxidation/reduction potential and is used to determine the level of water sterilization. The parameters or setpoints are the minimum/ maximum accepted redoX levels before the titanium cell is connected/disconnected. Adjusting the ideal redoX level (setpoint) is the last step in the Station start up sequence.

Table of Contents