American Legend AL3010W Quick Strat Manual

American Legend AL3010W Quick Strat Manual

89'' kirkwood billiard table

Advertisement

We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
FAX: 1-866-873-3531
gameroom@escaladesports.com
Please
have your model number when inquiring about parts.
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
Your Model Number ____________________
2 - AL3010W-
Date Code ___________________________
Purchase Date ________________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
All Rights Reserved.
© 202 0 Escalad e Sports
DO NOT RETURN IT TO THE STORE
please contact us toll free @:
1-888-996-2729
Customer Service Department
Evansville IN 47706
AL3010W/F
Or write to:
Escalade Sports
P.O. Box 889
- SY
1
,
Fo r Custome r Servic e Cal l 1-888-996-2729

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AL3010W and is the answer not in the manual?

Questions and answers

Summary of Contents for American Legend AL3010W

  • Page 1 (if applicable) and part number if requesting a replacement part. These numbers are located on the product, packaging, and this owners manual. AL3010W/F Your Model Number ____________________ 2 - AL3010W- - SY Date Code ___________________________ Purchase Date ________________________ PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE All Rights Reserved.
  • Page 2: Assembly Tips

    IMPORTANT! READ EACH STEP IN THIS MANUAL BEFORE YOU BEGIN THE ASSEMBLY. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS 89'' KIRKWOOD BILLIARD TABLE Tools Required: Socket Head Wrench (Included) Furnitur e Polish and Cloth Assembly Tips Make sure you understand the following tips before you begin to assemble your billiard table. 1.
  • Page 3: Hardware Identifier

    HARDWARE IDENTIFIER (To Scale) H1 - 8mm x 150mm Hex Head Bolt (Not to Scale) (8 pcs) T1 - Socket Head Wrench (1 pc) H2 - 8mm x 40mm H3 - M8 Flat Washer H4 - M8 Lock Washer Hex Head Bolt (28 pcs) (28 pcs) (20 pcs)
  • Page 4: Assembly Note

    ACCESSORIES IDENTIFIER (Not to Scale) A1 - Billiard Ball Set A2 -Pool Cue A3 - Triangle (1 pc) (2 pcs) (1 pc) A4 - Cue Chalk A5 - Playfield Brush A6 - Table Leveling Shim (2 pcs) (1 pc) (4 pcs) Assembly Note: In the following Steps 1 , 2 , &...
  • Page 5: Parts Required

    PARTS REQUIRED 1pc - P1 Main Cabinet 12pcs - H2 Hex Head Bolt 2pcs - P3 Middle Leg 12pcs - H3 Flat Washer 2pcs - P4 Upper Leg 12pcs - H4 Lock Washer STEP 1 Attach the P4 Upper Leg, P3 Middle Leg onto the P1 Main Cabinet using the H2 Hex Head Bolts,H3 Flat Washers and H4 Lock Washers as shown in FIGURE 1.
  • Page 6 PARTS REQUIRED 2pcs - P2 Leg Base 8pcs - H3 M8 Flat Washer 8pcs - H2 Hex Head Bolt 8pcs - H4 M8 Lock Washer STEP 3 Attach the P2 Leg Base onto the P3 Middle Leg and P5 Bottom Leg using the H2 Hex Head Bolts,H3 Flat Washers and H4 Lock Washers as shown in FIGURE 3.
  • Page 7 I NSTRUCTIONS FOR LEVELING A POOL TABLE A ssemble pool table according to the instruction. Any type of level would be sufficient to perform this procedure. However, a two-foot level is recommended. Before leveling, make sure level is placed on the playing surface, not the rails. Level the ends between the corner pockets: Place the level on the playing surface between the two corner pockets and adjust the height by placing shims (#15) underneath the leg opposite of which the bubble in the level favors until the bubble rests in the middle of...
  • Page 8 7 . The purchase of a table cover will both protect and help keep clean the entire top of the table. Use a carpenters level to properly level the table using the enclosed A6 leveling shims. PRODUCT PARTS LIST FOR MODEL # AL3010W/F Key # Part # Qty.
  • Page 9: 90-Day Limited Warranty

    90 DAY LIMITED WARRANTY This customer warranty extends to the original owner, on the purchase of any ESCALADE SPORTS Product (hereinafter referred as the "Product"). WARRANTY DURATION: This Product is warranted to the original owner, for a period of 90 days from the original purchase.

This manual is also suitable for:

Al3010f

Table of Contents

Save PDF