Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for turck PD67-UNI Series
Summary of Contents for turck PD67-UNI Series
- Page 1 Your Global Automation Partner PD67-UNI-… RFID Handheld Instructions for Use...
- Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 3: Table Of Contents
Switching the display on and off................ 15 Start screen – Overview.................... 15 Performing a scan operation.................. 16 7.4.1 Performing a scan operation with the Turck RFID app ............ 16 7.4.2 Performing a scan operation via buttons on the device .......... 16 Reading and writing tags..................... 18 7.5.1... - Page 4 13 Technical Data........................... 49 14 Appendix: Conformity Declarations and Approvals.............. 50 14.1 EU declaration of conformity .................. 50 14.2 FCC/IC Digital Device Limitations (PD67-UNI-NA…) .......... 50 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document the following material can be found on the Internet at www.turck.com: Data sheet Approvals Configuration manual Naming convention Common synonyms for "data carriers"... -
Page 6: Notes On The Product
PD67-UNI-NA-… USA FCC Rules Part 15 Canada Industry Canada RSS-210 PD67-UNI-CHN-… China SRRC Notes on other variants are available on request. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 7: Manufacturer And Service
45472 Mülheim an der Ruhr Germany Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database contains software tools for programming, configuration or commissioning, data sheets and CAD files in numerous export formats. You can access the product database at the following address: www.turck.de/products... -
Page 8: For Your Safety
The devices may only be used as described in these instructions. Any other use is not in accord- ance with the intended use. Turck accepts no liability for any resulting damage. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 9: General Safety Instructions
30 dBm ERP > 0.22 m The minimum distances for other regions can be obtained from Turck on request. The radiation of UHF devices may impair the operation of electrically controlled medical equipment. Maintain an additional distance from active radiation sources up to the max- imum transmission distance. -
Page 10: Product Description
Display elements The device is provided with a 5" LCD display with an 800 × 480 px resolution and a capacitive touch screen. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 11: Properties And Features
4.4.1 HF operation The Turck HF system operates at a frequency of 13.56 MHz. Tags in compliance with ISO 15693 (NFC Type 5) can be written and read with the handheld. 4.4.2 UHF operation The Turck UHF system uses nationally specified operating frequencies for the communication between the tags and read/write heads. -
Page 12: Barcode Scanner
Interleaved 2 of 5 The following code formats can be read in addition to barcodes: Aztec code QR code Data matrix PDF-417 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 13: Connecting
Connecting Battery charging NOTE Turck recommends that the device should be charged for at least two hours before initial commissioning. „ Connect a USB plug connector to the network adapter. „ Connect the mains adapter to the electricity supply. V01.00 | 2020/03... -
Page 14: Commissioning
„ Press Scan, Read/Write or Barcode on the display. „ Position the tag within the detection range of the handheld. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 15: Operation
Operation Aligning the handheld To perform a write or read operation the handheld must be aligned to the required tag or bar- code. „ Reading or writing an HF tag: Place the tag on the yellow area of the handheld. „... -
Page 16: Performing A Scan Operation
The EPCs or UIDs of the detected tags are displayed and can be edited. Further informa- tion on this is provided in the section “Reading and writing data”. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 17 Interrupting a scan „ Press the right programmable button. The scan is interrupted and can be continued at a later time. The displayed time is stopped until the scan is continued. Aborting a scan „ Aborting a scan operation via the buttons on the device: Press the left programmable button.
-
Page 18: Reading And Writing Tags
More button: Opens the menu for other functions. Read button: Starts the read operation. Write button: Starts the write operation. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 19: Reading And Writing Tags - Extended Functions
7.5.1 Reading and writing tags - Extended functions NOTE The extended functions are only available for UHF applications. The following extended functions are available: Tag access password to use: Uses the access password when accessing tags. Change lock/unlock state: Locks or unlocks the selected memory area. The following states can be selected: State Description... -
Page 20: Example: Read Data
Press Read/Write on the start screen. Fig. 8: Start screen „ UHF applications: Select the memory bank to be read. Fig. 9: Selecting the memory bank Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 21 „ Select the required format for displaying the start byte. Fig. 10: Selecting the format „ Specify the start byte for the read operation: Press the current start byte and enter a new start byte in the following window. Fig. 11: Selecting the start byte V01.00 | 2020/03...
- Page 22 Fig. 12: Selecting the number of bytes „ Selecting the display format for the read data. Fig. 13: Selecting the display format Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 23 „ Press Read. Fig. 14: Button: Read The handheld starts the read operation. The read data is displayed on the screen. Fig. 15: Read data V01.00 | 2020/03...
- Page 24 Selecting the display format for the read data. „ Press Read. The handheld starts the read operation. The read data is displayed on the screen. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 25: Example: Write Data
7.5.3 Example: Write data A write operation can either be started from the start screen or from the Scan screen. Starting the write operation from the start screen If no EPC or UID was selected, the device normally writes the first tag found. The nearest tag is normally found first of all. - Page 26 Specify the start byte for the write operation: Press the current start byte and enter a new start byte in the subsequent window. Fig. 19: Selecting the start byte Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 27 „ Select the number of bytes to be written. If Some is selected, enter the number in the fol- lowing window. If All is selected, as many bytes are written as are available in the particu- lar memory bank of the tag. Fig. 20: Selecting the number of bytes „...
- Page 28 Reading and writing tags „ Press Read. Fig. 22: Button: Read „ Adjust the data in the table. Fig. 23: Write data Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 29 „ Press Write. Fig. 24: Write The handheld starts the write operation. The written data is displayed on the screen. Starting the write operation from the scan screen If the write operation is started from the Scan screen, a tag with a specific EPC or UID is written. „...
-
Page 30: Reading A Barcode
Connect the handheld via a USB cable to the USB port of a PC. „ Transfer data via the tag of the PC (e.g. Windows Explorer). Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 31: Setting
Fig. 26: Turck RFID app: Settings The Settings screen provides access to the following elements: Volume for audible signals Information on the version: Version of the Turck RFID app, type, serial number, firmware and battery status of the handheld. PD… password: Password for the handheld Email address for using the send function in Scan mode V01.00 | 2020/03... -
Page 32: Operating Mode Setting
„ Open the Settings screen. „ Select PD… password. „ Enter the password. The password is stored on the handheld. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 33: Setting The Scan Screen
Setting the scan screen The menu for the configuration of the Scan screen is divided into four areas: Sending data Scanning Display Security Fig. 28: Configuration menu V01.00 | 2020/03... -
Page 34: Area: Sending Data - Parameters
Read data in CSV format, one tag per line. The individual data items are separated by commas. The following order is used: EPC/UID, TID, USER data, location JSON Read data as JSON array Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 35 HTTP-POST – Placeholders The available placeholders depend on the time selected for sending. Placeholder Meaning Time for sending Batch Each tag GROKKER_ID Serial number of the handheld LOCALTIME Time and date (local), Format: 2015-12-02-21:26:53 GMTTIME Time and date (UTC), Format: 2015-12-02-21:26:53 EPC or UID of the tag found –...
- Page 36 url: “URL to display in a browser page”, html: “HTML to display in a browser page”, text: “text to display in a dialog” Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 37 The parameter can be set for a specific application in the name| (optional) prompt format (see also parameter table in the section “Integrating the Turck RFID app in the web application”). Tag data format Read data in CSV format, one tag per line. The individual data items are separated by commas.
- Page 38 Read data in CSV format, one tag per line. The individual data items are separated by commas. The following order is used: EPC/UID, TID, USER data, location JSON Read data as JSON array Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 39: Area: Scanning - Parameters
8.3.2 Area: Scanning – Parameters The following parameters can be set in the Scan area to detect data: Default values are shown in bold type. Parameter Selection Description Mode Once Each detected tag is indicated with an audible signal. The Once mode is suitable, for example, for Inventory commands if several tags are inside the detection range. -
Page 40: Integrating The Rfid App In The Web Application
The following order is used: EPC/UID, TID, USER data, location. JSON Read data as JSON array Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 41 Parameter Value Description Configuration of the Clipboard (if destination=clipboard) tagDataFormat Read data in CSV format, one tag per line. The individual data items are separated by commas. The following order is used: EPC/UID, TID, USER data, location JSON Read data as JSON array Scan parameters volume 0…100...
-
Page 42: Adapting The Rfid App
// This gadget is a TextAndImageButton. The variables that define // its appearance should be pretty straightforward. turck.ui.TextAndImageButton({ Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 43 // defined here will call the function called showScanPage. click: function() { app.showScanPage(false); } // Another button like the one above. This one is for the read/write // page of the app. turck.ui.TextAndImageButton({ position: "curve", text: "@string/HomePageReadWriteButton", buttonColor: "@color/home_button_text", buttonPressedColor: "@color/turck_yellow", image: "@drawable/read_write_button",...
- Page 44 // behavior. Any page (this scan page, the read/write page, the gadget // page from before, etc) can have a function like this. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 45 // the showReadWritePage function shows the read write page. If an epc is // passed into the function, it will load that tag automatically. showReadWritePage(epc) { app.showPage(new turck.ui.ReadWritePage({ epc: epc, titleText: "@string/HomePageReadWriteButton", // runs when a tag is found. if this is a tag we want to read/write, // return true.
- Page 46 // onPD67RightButtonPress works the same way it did above. onPD67RightButtonPress: function() { (!this.isScanning) { this.startBarcodeScan(); else this.cancelBarcodeScan(); })); // Create the app object. very important! app = turck.DefaultApp(); Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 47: Troubleshooting
Troubleshooting If the device does not function as expected, first check whether ambient interference is present. If there is no ambient interference present, check the connections of the device for faults. If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. -
Page 48: Maintenance
Disposal The devices must be disposed of correctly and must not be included in normal household garbage. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 49: Technical Data
Battery capacity 2400 mAh Communication Bluetooth Low Energy V4.0, WLAN 802.11 b/g/n Supplied software Turck RFID app, SDK free of charge Operating system User-defined Android ROM Barcode (only for PD67…RSWBG) 2D Imager (reads 1D and 2D barcodes) Docking station connection type USB 3.1 Type C... -
Page 50: Appendix: Conformity Declarations And Approvals
This digital apparatus complies with Canadian ICES-001 (A). Cet appareil numérique est conforme à la norme NMB-001 (A) du Canada. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 51 Over 30 subsidiaries and over 60 representations worldwide! 100004007 | 2020/03 100004007 www.turck.com...
Need help?
Do you have a question about the PD67-UNI Series and is the answer not in the manual?
Questions and answers