Summary of Contents for baaske e-medic SILENCE TP 7
Page 4
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses and can radiate radio frequency energy.
Safety Instructions Intended use The e-medic Silence TP7 is intended to serve as a medical monitor which is designed for general purpose for hospital environment. It shall not be used for life-supporting system. Intended User profile The equipment is intended for infant or adults by profession Health care professionals.
Page 13
C) Caution: This adapter Sinpro HPU101-107 is a forming part of the medical device Contact information: Baaske Medical GmbH & Co. KG Bacmeisterstraße 3 32312 Lübbecke | GERMANY Tel. +49 (0) 5741 236027 0 E-Mail: sales@baaske-medical.de...
Introduction Product Description The e-medic Silence TP7 Medical Panel PC is based on Intel 7th generation Core i mobile CPU (U series) processor, it accommodates one M.2 SATA SSD as drive disk and up to 32GB DDR4 SODIMM. The high brightness LCD, Fanless solution, integrated multimedia functions and extensive expansion options make them the perfect platform upon which to build comprehensive lifestyle computing applications.
Package list Before you begin installing your Medical Station, please make sure that the following items have been shipped: • The e-medic Silence TP7 Medical Panel PC unit • User‘s manual, chipset drivers • Power Adapter x 1 (Mf:Sinpro, type/model: HPU101-107) •...
Page 18
Hardware Specifications 22"/24" 250 nits 1920x1080 TFT LCD Display FCBGA1356 7th generation Intel® Core i7/i5/i3 CPU Support and Celeron processor (15W max.) (SSD, 3.3Vdc, 1.5A max.) Disk Drive Space Optional door (5Vdc, 1.0A max.) One Mini PCIe slot (total loaded 2.277W) One M.2 Type E slot (total loaded 2.277W) Expansion One PCI-E x 4 expansion slot (total loaded 13.25W...
Page 19
Standard version PCI-E x 4 slot *1 PCI-E x 4 slot *1 (Gold finger) RS-232 port *1 + RS-232/422/485 port *1 USB 3.0 port *4 Side USB 3.0 port *2 (Option ) DC-in w/ lock function *1 Gigabit LAN RJ-45 Connectors *2 DP output *2 Sound: Line-in *1...
Page 20
LCD Specifications Model Name e-medic Silence TP7 Display Type Max. Resolution 1920 x 1080 (Full HD) Contrast Ratio 3000 : 1 (Typ) Pixel Pitch (um) 248.25 x 248.25 Luminance (cd/m2) 250 (TYP) Viewing Angle 178°(H) 178°(V) Cautions: Continuous displaying fixed pattern may induce image sticking. It`s recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen.
Environmental Specifications Temperature Operating: 0°C to 35°C (32°F ~95°F) Storage, Transportation: -20°C to 60°C (-4°F ~140°F) Humidity Operating: 10% to 90%@ 35°C, non-condensing Storage, Transportation: 10% to 90%, non-condensing Vibration Operating: 15g/0.53 oz, 11 ms, half sine wave Non-operating: 50g/1.76 oz, 11 ms, half sine wave Shock Operating: 5 ~ 17 Hz ,...
Page 22
Emissions test Compliance Electromagnetic environment guidance WMPRF The model e-medic Silence emissions TP7 uses RF energy only for its CISPR 11 internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment.
Page 23
For transmitters rated at a maximum output power not listed abo- ve, the recommended separation distanced in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Page 24
interruptions 0% UT 0 % UT Mains power quality (100 % dip (100 % dip should be that of a voltage in UT) in UT) typical commercial or variations for 0.5 cycle for 0.5 cycle hospital environment. on power If the user of the supply 0 % UT 0 % UT...
Page 25
Portable and mobile RF communications equipment should be used no closer to any part of the model, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance Conducted RF 3 Vrms d = 1,2 IEC 61000-4-6...
Page 26
Cleaning/Disinfecting Steps: 1. Wipe the e-medic™ Silence TP 7 with a dry clean cloth. 2. Operate with manufacture´s instructions or hospital protocol. Cautions: • Do not immerse or rinse the e-medic™ Silence TP 7 and its peripherals. If you accidentally spill liquid on the de- vice, disconnect the unit from the power source.
Page 33
Unplug the power cord from the power adapter jack to disconnect the device. Turn off the system: Turning off e-medic™ Silence TP 7 properly is important for system reliability.
Page 54
Pin # Signal Description Pin # Signal Description WAKE# +3.3VSB Reserved...
Page 66
1..1 PCIE PCIE X4 Golden Finger for ISO Interface Side B Side A Side B Side A ISOUSB_SELECT LPC_FRAME# LPC_AD0 PCIE1_RXN PCIE2_RXN +3.3VSB LPC_AD1 PCIE1_RXP PCIE2_RXP +3.3VSB LPC_AD2 +5VSB LPC_AD3 PCIE1_TXN PCIE2_TXN +5VSB USB_OC# PCIE1_TXP PCIE2_TXP +5VSB COM_GPO1 +5VSB COM_GPO2 PCIE1_CLKN USBPP +5VSB...
Page 67
DR-202W2 Lithium-ion 3S-3P 7500 mAh 10.8V 12.6 V 10 A 12.6 V 16 ± 0.5 A 6 ± 0.5 A < 1mA 140mm x 89mm x 19.7mm 470g Charge: 0 50 C Discharge: -20 75 C -30 60 C 81Wh * e-medic™.Silence.TP.7 series are only allowed to use the DR202W2 battery.
Page 68
BIOS Battery status Battery Full Charge Status : Full Charge Battery in Charge Status :Charging Battery in Discharge Status : Discharge Nonworking Battery Status : Stand by Low power Battery Status : Low Battery No battery or Battery in very low power state Status : N/A...
C. Scrap Computer Recycling If the computer equipments need the maintenance or are bey- ond repair, we strongly recommended that you should inform us as soon as possible for the suitable solution. For the compu- ters that are no longer useful or work well, please contact with worldwide distributors for recycling.