Set Up; Configuration Of The Speakon Connector (2-Pin) - Fame Audio SOUNDPACK 12 MKIII User Manual

ENGLISH

Set up:

All connections of the device should be made before switching on. Only use high-quality and
undamaged cables that are as short as possible for the connections.

Configuration of the Speakon connector (2-pin):

Please take care for a accurate wiring for the power wiring as for the speaker / input wiring.
Please use only undamagedcables of an adequate size (min. 2 x 1.5 mm² for speaker connection)
as well as only completely unrolled cable reels. Please check the wiring for any kind of trip hazard
etc. to prevent any kind of accidence or damage (Gaffa-Tape)Please do not install the items
directly beside an edge like a stage border. If a stand is used to place a satellite upon the item
please make sure to use only undameged stands (Ø 36 mm) fitting correctly into the support.
It is recommended to switch the system to ON as the last one and to OFF as the first one to
prevent start-up noisecaused by a connected devices like mixer etc..