Installation Notes - Swann Retro SR11010 Installation And User Manual

Installation Notes

BEFORE SITING YOUR
REFRIGERATOR:
Fit the 2 spacer pegs as shown in the
diagram. These will prevent the product
from being pushed too close to the wall
and damaging the cooling system.
It is important that upon receipt you stand your appliance upright for at
least 4 hours before switching on to allow the system to settle. Please
note that the door cannot be reversed on this product.
1. The appliance should not be tilted more than 45 degrees when you move it. Do
not use force on any part such as the condenser, the door or handle. They could
distort and affect the operation of the refrigerator. Ensure all packaging is removed
before installation
2cm
2cm
2cm
2. Make sure there is enough ventilation space around the sides and top of the
refrigerator.
5
SR11010.indd 5 13/07/2020 08:51