Description‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1; Safety Manual‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1; Feature‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1; Other Instructions‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧1 - DANIU QY-EWQ-01 Manual

Description
1.
This product is a professional infrared forehead thermometer to measure the temperature of the
human forehead. Different body parts were measured for different temperatures, because the more
exposed the body parts were, the more influenced by the ambient temperature.
Safety manual
2.
Please read this manual carefully before use, users should use this product according to the
instructions.
The ambient temperature of this product is 16 ℃ ～ 35 ℃, the optimal temperature is 25 ℃.
Do not use this product in an environment above 50 ° C or below 0 ° C.
Do not place this product near live objects to avoid electric shock.
Do not use this product in an environment with a relative humidity greater than 93%.
Do not place this product too close to the electromagnetic range. (E.g. radio, mobile phone, etc.).
Please do not expose this product to the sun, or near the stove, and do not touch the water.
Do not bump or drop the product, and do not use it if it is damaged.
Sweat, hair, hat, or other foreign matter on the forehead can affect the accuracy of the measurement.
Please make sure the measurement distance is within 3-5 cm.
When forehead sweating or other reasons cause the forehead temperature does not reflect the body
temperature normally, please measure from the earlobe.
When cleaning is required, wipe the surface of the meter lightly with alcohol.
Contact the distributor if there is any problem with the product and do not repair the product by
yourself.
Feature
3.
1） Measure body temperature with high accuracy.
2）Optional for ℃ or ℉
3） Buzzer function
4） LCD display with backlight
5） Automatic range selection; resolution is 0.1 ° C (0.1 ° F)
6） The latest 20 measurement data can be memorized and stored (press the up and down arrow keys
to check that the latest 20 measurement data have been stored)
7） Automatic saving data and shutdown
Other instructions
4.
1) This infrared forehead thermometer is a professional thermometer for measuring the forehead of a
human body. It is widely used for the householder, unable to replace a doctor's diagnosis.
2) This manual is applicable to QY-EWQ-01, QY-EWQ-02, QY-EWQ-03 models.
5. Precautions before use:
1) Make sure follow the below steps before using:
Step 1: Use a traditional thermometer to measure, assuming got the value is 7.5 ° C (99.5 ° F)
Step 2: Then, use our infrared forehead thermometer to measure the same person, the distance is 3-5
cm between the thermometer and the forehead (be careful to remove any obstacles that may affect the
measurement, such as hair, sweat, etc.), if you get the same temperature 37.5 ° C (99.5 ° F), the
infrared forehead thermometer is set up and ready for use. If you get a low reading, such as 36.4 ° C
(97.5 ° F, a difference of 1.1 ° C (2.0 ° F), you need to correct the infrared forehead thermometer, plus
the difference. Calibration steps "Note! Non-professional not operational!" After 5S, press and hold
the + key and the function key to power on. After hearing 2 beeps, press the-key to enter the
calibration mode. Take the 35-degree standard body and the 40-degree standard body in sequence. The
calibration is completed. Then switch to material temperature mode for temperature verification.
Step 3: Measure again to check.
2) Power on self test
△ Aim at the target and press the measurement switch, the LCD will display all the numbers and
characters of the self-test.
And a self-test screen appears, as shown in Figure 1. This picture is displayed for about 1 second.
3 / 16