Contents 1. SAFETY PRECAUTIONS....................3 2. INTRODUCTION .........................4 3. FEATURES..........................5 4. PACKING LIST ........................7 5. NAME and FUNCTION of EACH PART................8 6. INSTALLATION ........................9 6.1 Camera Installation......................9 6.2 Connect to Monitor......................12 6.3 Connect the Power......................12 7. OPERATION ........................13 7.1 OSD Framework......................13 7.2 OSD Main Menu Description..................14 7.2.1 LENS: MANUAL /AUTO selectable.
1. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! C AUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger.
2. INTRODUCTION Clear image quality has been achieved by employing a 1/3” Hi-Res. CCD, which provides a horizontal resolution of 560 / 650 TV lines. The camera can be by External Light Sensor; it provides Color image in full light condition (Day) and provides B/W image in low light condition (Night) to reach the best effect.
3. FEATURES High Resolution Excellent Sensitivity CCD Sensor provides high resolution High sensitivity, low smear, high reaching 560~600 / 650~700 TVL with anti-blooming and high S/N ratio. advanced and clear picture quality. Adaptive Tone Reproduction (ATR) Digital Noise Reduction (DNR) ATR is the Single Scan WDR function;...
Page 6
Lens (External manual focus) Ifrared Built-in DC-type Vari-Focal lens with Built in the 42 pieces IR LED to support ICR / Without ICR. 40 Meters Mechanism OSD (On Screen Display) Setup Menu. Weatherproofing Housing Design and Camera tile setup of up to 16 alphanumeric Internal wire system with anti-cut letters.
4. PACKING LIST Check to make sure all of the items shown below are included in your Portable Security Recorder Kit. If something is missing, contact your dealer as soon as possible. Item Description Item Picture Camera & Bracket Appurtenances Fix retaining screw &...
6. INSTALLATION 6.1 Camera Installation 1. Install Camera Use the supplied screws (in the appurtenance bag), and secure the camera in position. 2. Adjust 2-Axis Bracket Adjust the bracket while checking the view angle from Axis) the monitor. Loosen the X-Y screws and then adjust the 2-Axis bracket (X-Y to get the desired viewing angle.
Page 10
3. Focus Adjustment Focus adjustment should be done with zoom focus at the same time. Use the screwdriver to adjust the zoom/ focus ratio (from wide to tele or near to far). NOTE: Focus adjustment position differs depending on model type. 4.
Page 11
Table below shows the suggested LED brightness and IR distance adjustment: LED Brightness IR Distance Focal Length H (High) 25m~40m 9~22mm M (Middle) 15m~25m 6~12mm L (Low) 10m~15m 3.7~6mm (1) Function Switch 1 Left Key 2 Up Key 3 Enter Key 4 Right Key 5 Down (2) IR Distance Adjustment...
6.2 Connect to Monitor Connect the Video-out port of the camera to a monitor. As the connecting method varies depending on the instrument, therefore refer to the manual supplied with the instrument for more information. 6.3 Connect the Power Connect to a DC 12V, 500mA adaptor or an AC 24/ DC 12V adaptor (option). Note: The Alarm out application cable is the optional item, so the standard type not provides it.
7. OPERATION 7.1 OSD Framework Main Menu Display OSD Setup Menu page 1 LENS AUTO↲ SHUTTER /AGC AUTO↲ WHITE BAL BACKLIGHT ↲ ↲ PICT ADJUST NEXT↲ EXIT↲ SAVE ALL OSD Setup Menu page 2 PRIVACY MOTION DET CAMERA ID LANGUAGE ENGLISH CAMERA RESET BACK↲...
7.2 OSD Main Menu Description 7.2.1 LENS: MANUAL /AUTO selectable. LENS: MAUNAL Not adjustment LENS: AUTO TYPE:DC AUTO MODE:AUTO/ OPEN /CLOSE SPEED:000~255 AUTO: Camera automatically controls the lens. OPEN: Lens fully open. CLOSE: Lens fully closed. SPEED: Speed of the lens. 7.2.2 SHUTTER/AGC: AUTO / MANUAL selectable.
7.2.4 BACKLIGHT: BLC / HLC / OFF selectable. BACKLIGHT.: BLC Enable the function of Back Light Compensation, and the detection method is the BLC Smart. BACKLIGHT.: HLC Enable the function of High Light Compensation. 7.2.5 ATR: ON / OFF selectable. ATR.: ON LUMINANCE LOW、MID、HIGH LOW、MIDLOW、MID、MIDHIGH、HIGH...
7.2.8 NEXT: ↲ Move to MAIN MENU, page 2 7.2.9 EXIT: ↲ Exit OSD to choose the list. 7.2.10 SAVE ALL: When you change the OSD menu settings, before leaving the OSD item option SAVE ALL. Press ENTER key to change the memory settings for the OSD. 7.2.11 PRIVACY: ON / OFF selectable.
7.2.12 MOTION: ON / OFF selectable. MOTION DET: ON DETECT SENSE 000~127 BLOCK DISP ON / OFF / ENABLE MONITOR AREA ON / OFF AREA SEL 000~244 (NTSC) / 000~288(PAL) BOTTOM 000~244 (NTSC) / 000~288(PAL) 540TVL:000~378 (NTSC)、000~370 (PAL) LEFT 650TVL:000~474 (NTSC)、000~468 (PAL) 540TVL:000~378 (NTSC)、000~370 (PAL) RIGHT 650TVL:000~474 (NTSC)、000~468 (PAL)
The character selected by the camera ID cursor is cleared when the Enter operation input is performed from the status in which CLR has been selected using the character selection cursor. The display switches to the camera ID display position setting screen when the Enter operation input is performed from the status in which POS has been selected using the character selection...
6. SPECIFICATION 1/3” SONY COLOR 1/3” SONY COLOR Image Device SUPER HADⅡCCD Ex-view HAD CCDⅡ (Sony Chipset) (Sony Chipset) NTSC: 768x494 NTSC: 976x494 Effective Picture Elements PAL: 752x582 PAL: 976x582 Horizontal Resolution 560 TVL 650 TVL Minimum Illumination 0.05 Lux/F2.0 (DAY) 0.03 Lux/F2.0(DAY) Day to Night Illumination Under 5 Lux...
Need help?
Do you have a question about the EFFIO-E and is the answer not in the manual?
Questions and answers