IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Before wiring to power supply
and during servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping must be performed
by qualified service personnel. Product must be grounded to avoid potential electric shock or other potential hazard.
Product must be at locations and at heights and in a manner consistent with its intended use, and in compliance with
Electrical Code and local codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
12.9"
2.36"
0.67"
1.69"
Ø0.47"
Ø0.47"
Ø1.1"
Ø0.19"
Ø0.47"
Top
(Power Box)
Step 1
Push the Enlighted RJ45 connector and DC cables through the
stem.
METEOR LIGHTING
*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 1
Push the Enlighted RJ45 connector and DC cables through the stem. METEOR LIGHTING Page 1 P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 2
Refer to the wiring diagram for a detailed explanation. METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com Page 2 *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 3
Step 9 Connect AC Cable to Junction Box. METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com Page 3 *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 4
Power Box White(+) Fixture Black(-) (Junction Box) METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com Page 4 *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Need help?
Do you have a question about the Whiz 2.0 and is the answer not in the manual?
Questions and answers