Philips QC5130 Manual page 31

3
4
5
Note: The appliance does not need any lubrication.
The cutting unit, the adapter and the hair
clipping comb are replaceable.
Replace the cutting unit if it is damaged or worn.
Only replace the cutting unit with an original Philips
cutting unit.
1
2
DFU_QC5130_CS2_0625.indd 30
Push the middle part of the cutting
unit upwards with your thumb until it
opens (Fig. 11).
Clean the cutting unit with the cleaning brush
supplied (Fig. 12).
Clean the inside of the appliance with the
cleaning brush supplied (Fig. 13).
Replacement
Replacing the cutting unit
Push the middle part of the cutting unit
upwards with your thumb until it opens and
then pull it off the appliance (Fig. 14).
Place the lug of the new cutting unit in the
slot and push the cutting unit onto the
appliance ('click') (Fig. 15).
English
0
12.6.25 4:45:22 PM