Related Manuals for FNX Solar FLEX-GEN 200
Summary of Contents for FNX Solar FLEX-GEN 200
- Page 1 PORTABLE POWER STATION USER MANUAL v1.0 FLEX-GEN 200 Please read the user's manual first before operating to avoid damaging the device and to ensure user safety.
- Page 3 Please take time to thoroughly read the user manual to avoid unwanted malfunctions and to ensure your safety while using the device. For precautionary measures on handling, operating,etc.: Safety Precautions(pages1,2) Handling Precautions(page3-5). We recommend to thoroughly read the whole manual before operating Our company will not assume any responsibility if any accident happens due to the user's failure to read the...
- Page 4 User Manual Thank you for choosing FLEX-GEN200. In order to ensure the safe and correct use of this product, please read the user manual carefully before operating. ▇ This manual covers all essential knowledge in operating this product. ▇ This manual is only applicable to FLEX-GEN200 . ▇...
- Page 5 Symbols (Page **):Reference page for more information :warnings about problems with the power supply :Additional information :Tips or advice for better use of the power station :Suggestions for troubleshooting...
-
Page 6: Table Of Contents
Content .............. Safety Precautions Handling Precautions (Reserve and Use of Equipment Correctly) ..............................Package List Product description ............... 7 ............Iproduct parameters ......Introduction of the parts and functions ......Operation instructions and precautions How to charge the battery ........... How to use AC 220V/110V .......... -
Page 7: Safety Precautions
Safety Precautions To protect yourself and others from harm and to protect your equipment from damage, please read all the following information carefully before using your equipment. 1.Do not put the battery near high temperature objects and do not store in places >40 degrees celsius. 2.NEVER use the product when wet.Keep it in a cool and dry place during storage. - Page 8 • Use only chargers that are specifically designed for the device and approved by our company. Unmatched chargers may cause danger or damage the device. • Do not throw battery into fire. When disposing of waste power, please comply with local and national regulations. •...
-
Page 9: Handling Precautions (Reserve And Use Of Equipment Correctly)
• Extreme temperatures can damage the device, reduce its charging capacity, and shorten the life of the power supply. • Do not use a damaged charger. Handling Precautions (Custody and Use of Equipment Correctly) Keep the power supply dry • Moisture and liquids can damage equipment components or circuits。... - Page 10 cause danger because the internal temperature of the vehicle can reach as high as 80°C during the summer. • Do not expose the power supply to direct sunlight for long periods of time. • When charging the power supply, the operating temperature should be guaranteed between 0 °C and 40°C Do not store equipment near or inside water heaters, microwave ovens, hot cooking equipment or high pressure...
- Page 11 • Our company will not be responsible for any damage to the product or any accidents (such as fire) caused by using accessories not provided by FNX Solar. • Please note that any failure of this product caused by the use of accessories that are not origina,l is not covered by the warrant, but the user can opt to pay for the repairs.
-
Page 12: Package List
(Optional accessories should be explained with the manufacturer or distributor before purchase if necessary.) Charging adapter Car charging cable Cigar port Packing list Quantity FLEX-GEN 200 Charging adapter Car charging cable Cigar port User Manual & warranty card... -
Page 13: Product Description
FLEX-GEN series portable power stations were designed to support solar charging for a worry-free get away. The following examples illustrate the power capacity of FLEX-GEN 200 based on common appliances Laptop (50W): 4+ Hours Tablet: 8-12 Recharges Smartphone: 15-20 Recharges 12V Refrigerator: 3.8 Hours... -
Page 14: Iproduct Parameters
Product parameters Model FLEX-GEN 200 200W Rated output power 400W Peak power AC pure-sine wave 220V50Hz or AC110V60Hz Output voltage DC 9~12.6V8A(MAX15A) USB 5V1A 5V2A QC3.0 Battery type Lithium-ion battery Battery capacity 192.78Wh(10.8V17.85Ah) Life circle 70%@1000cycle Charging time 7~8H Charging voltage... -
Page 15: Introduction Of The Parts And Functions
Introduction of the parts and its functions Front Panel... - Page 16 Description Power display screen:The number shows remaining power,the first digit flashes when it is charging and when the remain power lower than 10%,the display will display flashing numbers. AC indicator:When the AC output switch is on,the indicator is green.When the remaining power is less than 10%,the indicator will change to red.
- Page 17 Side Panel...
-
Page 18: Operation Instructions And Precautions
Description AC output switch:AC output will work after turning it on. AC output sockets:It can be used for emergency power for equipments that does not exceed device specification(200W) Switch for LED light:The led light will be on after pressing the switch. LED lights:IThe lighting power is 1W*2. -
Page 19: How To Charge The Battery
▇ Use the original charger provided by the manufacturer In order to ensure the safety of charging, please use the original charger provided by the manufacturer, or use solar panels with 18V 60W(max) to charge the power unit. Warning:Please pay attention the power unit when it's charging.Please disconnect the charger and stop charging when the unit is fully charged. - Page 20 1. Charge the power unit with the original adapter from our company. During charging, we need to insert the end of the power cord into the adapter terminal and connect the 220V/110 AC mains. The DC output of the other end of the adapter is connected to the power charging interface.
- Page 21 3.Charge the battery with solar panel. In this case, it is only necessary to connect one end of the connection cable to the solar panel and the other end to the power charging interface.(Use 18V/60w solar panel modules) Warnings: 1. Only use original accessories and don't operate the device when wet .
-
Page 22: How To Use Ac 220V/110V
Please note the following before using it： 1 . The input voltage and frequency of the appliance must be the same as that of the FLEX-GEN 200. 2 . Please ensure that the rated power of the appliance is less than the rated power of the 200W power supply, preferably within 80% of the rated power. - Page 23 3. FLEX-GEN 200 will stop working to protect the device once following conditions occurs: ① When external load exceed the rated power load ② AC output or load circuit ③ Internal temperature of the device is too high. ④ The voltage of the internal battery is too low.
-
Page 24: How To Use Dc Output
Step 3： Check the load power and ensure it’s not higher than the rated power of FLEX-GEN 200 Step 4：Plug in the AC socket of FLEX-GEN 200 and turn on the load switch. Step 5：Turn off the AC output switch after using it. -
Page 25: Troubleshooting
or lack of battery so that you can use it conveniently next time! Note: Be sure to turn off AC mode when you don't （ need it. Keeping it on will take a huge amount of power from the battery and might even damage it. Troubleshooting Error Root... -
Page 26: Warranty And After-Sale Service
Warranty The warranty of FLEX-GEN 200 is within 6 months after you buy the product;During the warranty period, our company will be responsible for the defects on material and process, we will change the damaged parts after receiving them back or maintain the product for free once our technicians inspect that the breakdown occurs normally；... - Page 27 Our company reserves the right to add or delete any maintenance and warranty terms without notice. The company does not assume any responsibility for any damage to your equipment caused by incorrect use of the company's products. For compatibility of this product with your device, please confirm it with dealer at the time of purchase.
-
Page 29: Statement For Poisonous And Harmful Substance Of The Power Unit
Statement for poisonous and harmful substance of the power unit Poisonous and harmful material and elementd Parts (pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE) Structuralpa parts × ○ ○ ○ ○ ○ Circuit board × ○ ○ ○ ○ ○ Adapter ×... -
Page 30: Copyright
Copyright This user manual is protected by international copyright laws. No part of this manual may be reproduced, distributed, translated or transmitted in any form or by any means (electronic or mechanical), including photocopying, recording or storing in any information storage and retrieval without the prior written permission of the company. - Page 32 ▇ Some of the instructions in the manual may not exactly match the device, depending on the device software and service provider. ▇ Power unit and accessories may differ from the icons in this manual, depending on country in which the power unit will be used.