Somark Ai.Suite Assembly Manual

SYMPTOM POSSIBLE CAUSE
The Ai.Connect may not be turned-on
Ai.Connect does not
or the power cable may not be
turn on / boot-up
connected properly.
Ai.Read is not The Ai.Read may not be
displayed in the connected to the Ai.Connect.
Devices List
The Ai.Read may not be powered up
or turned-on.
Ai.Read does not receive its power
from Ai.Connect. It must be plugged
into a power outlet.
The USB cable may be faulty.
Devices connected A USB cable may not be securely
through the USB Hub connected to the USB Hub or to the
are not displayed in Ai.Connect.
devices or are not
responding
The Device List does not display a
USB connected Digital Callipers,
Mouse and Keyboard.
The connected USB device may not
be powered up / turned-on.
The USB device may require a re-set.
The Ai.Connect does not The Ai.Connect may have received
boot up and continues to a software update or may not have
show a loading screen
powered down or powered up
correctly previously.
The format of dates is The region setting in Windows on the
incorrect in the Animal Ai.Connect does not match the region
Date of Birth and Date the Ai.Connect is being used in.
of Reported Death
ACTIONS
Check the LED indicator at the rear of the
Ai.Connect.
If the LED light is not illuminated ensure
the Ai.Connect power cable is securely
connected to the Ai.Connect and plugged
into a power outlet.
The Ai.Connect must be turned on using
the Power button located on the rear of
the device.
Contact customer support at
support@mysensalab.com if the LED
indicator at the rear is illuminated and the
device is not providing a display.
Check the cable which connects the
Ai.Read to the Ai.Connect (USB A to USB
B cable) is securely connected to the
Ai.Read USB port and to the Ai.Connect
top USB port (or attached using the USB
Hub).
Ensure the Ai.Read power cable is
securely connected to the Ai.Read and
plugged into a power outlet.
Ensure the Ai.Read has been turned on
using the power button located on the rear
side of the device. The power indicator at
the front of the device will illuminate when
the device has been turned on.
Contact customer support at
support@mysensalab.com to order a
replacement USB A to USB B cable.
Ensure the USB cables between the device
and the USB Hub are securely attached to
both the device and the USB Hub.
Check the USB Hub is securely
connected to the Ai.Connect using the
top USB port on the Ai.Connect.
Some devices must be turned on using a
button on the device or require external
power.
Ensure the power cable is correctly
attached to the device and the device is
turned on.
Disconnect the device USB cable from the
USB Hub and reconnect the device after
2 minutes.
Disconnect the USB Hub cable from the
Ai.Connect and reconnect the Hub after
2 minutes to the top USB port on the
Ai.Connect.
In some instances the Ai.Connect may
have received a software update which
requires a reboot. Keep the power button
located on the rear of the device pressed
for 5 seconds to force the device to reboot.
If the issue persists, contact customer
support at support@mysensalab.com
Contact customer support at
support@mysensalab.com
Ai.Suite
Assembly Guide
Powered by
Statement of confidentiality:
The information contained in this document is proprietary to Somark Group Ltd
and its subsidiaries (Somark). This document is provided by Somark with the understanding
it will be held in the strictest confidence and will not be disclosed or duplicated in whole or in part.