Page 4
Dear music lover, Thank you for purchasing a Pro-Ject Audio Systems record cleaning machine. In order to achieve maximum performance and reliability, please study these instructions carefully. Warning of a hazard for the user, the unit or possible misuse. Important notice.
Page 5
3 rocker switches ("main switch", "motor" and "vacuum" should be in position "0"). Connect the power cord to the socket on the rear side of VC-E and turn the main switch to the "I" position. Place a record on the bottom plate. Using moderate force, thread the top clamp plate on the threaded tip of the centre spindle.
Page 6
1. disconnect the mains cable 2. Turn the VC-E up to drain the unit reservoir to a big container. 3. Clean the liquid on the body of the unit using a cloth Regularly check the velvet strips on the arm. Make sure they are clean, no dirt or debris is present.
Page 7
How to adjust the height of VC-E’s record clamp The VC-S is pre-adjusted to spec for normal standard 80 – 180 g records. There is enough headroom, so that the arm is optimally pressed against the record and the cleaning fluid can be completely removed.
Need help?
Do you have a question about the VC-E and is the answer not in the manual?
Questions and answers