Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for JB Systems LED FAN RGB
-
Page 3: Before Use
ENGLISH USER MANUAL OPERATION MANUAL ® Thank you for buying this JB SYSTEMS product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES •... - Page 4 • Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. JB SYSTEMS LED FAN RGB ®...
-
Page 5: Overhead Rigging
10. Mains output: you can use a special PowerCON power cable to connect this output with the mains input of the next LED FAN RGB for easier linking up to 10A. Always pay attention to the maximum load ® while adding projectors! Special Multi cables PowerCON... -
Page 6: Electrical Installation
DMX-input is the “master”, the others are the slave units. • Make sure that all units are connected to the mains. • Refer to chapter HOW TO SETUP for more information. Electrical installation for two or more units in DMX-mode: JB SYSTEMS LED FAN RGB ®... -
Page 7: How To Set Up
SPxx (SP followed by 2 numbers) will appear on the display. This is the speed of the program. Use the DOWN and UP buttons to change the speed (SP50 = slowest, SP00 = max. speed) Press [ENTER] to confirm your setting JB SYSTEMS LED FAN RGB ®... -
Page 8: Sound Sensitivity
• Press the [MENU] button until [dISP] is shown on the display. • Press [ENTER] to access the function settings • Use DOWN and UP buttons to change the setting [YES] invert display (upside-down) [no] don’t invert display. • Press [ENTER] to confirm JB SYSTEMS LED FAN RGB ®... -
Page 9: White Balance
DMX charts below: 4 channel DMX-Mode Channel: Value: Function: 000-255 Red (0-100%) 000-255 Green (0-100%) GREEN 000-255 Blue (0-100%) BLUE 000-127 Position 128-191 Clockwise Rotation (Fast > Slow) MOTOR 192-255 Counter Clockwise Rotation (Fast > Slow) JB SYSTEMS LED FAN RGB ®... -
Page 10: Maintenance
• In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be cleaned monthly. • The interior of the device should be cleaned annually using a vacuum cleaner or air-jet. JB SYSTEMS LED FAN RGB ®... -
Page 11: Specifications
486x 0.2W SMD5050 RGB LEDs Dimension: 500x500x85mm Weight: 9.4 kg All the information is subject to change without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS LED FAN RGB ®...
Need help?
Do you have a question about the LED FAN RGB and is the answer not in the manual?
Questions and answers