Advertisement
Quick Links
Advertisement
Summary of Contents for Ward-Beck Systems XTM4
- Page 1 XTM4 EXTENDED RANGE TEST METER by WardBeck Systems Rev:Oct.01 2014...
-
Page 2: Front Panel
XTM4 EXTENDED RANGE TEST METER The X TM4 is a versatile test meter for the measurement of analog, AES3 and SDI embedded audio signals over a wide range. Occupying two rack units of space, the unit ... -
Page 3: Operation
OPERATION: AES digital or analog audio signals may be connected via the front panel TRS ¼” jacks or via the rear mounted XLR3(F) connectors. Please note that the digital XLR3(F) ... - Page 4 Source Selection The front panel M ODE button cycles through the three signal sources: ANALOG A0 Front Panel TRS Jacks (CH A (L) and CH B (R)) A1 Rear Panel XLRs (CH A (L) and CH B (R)) DIGITAL D0 Front Panel TRS Jack D1 Rear Panel connector (XLR or BNC as defined in MODE ) SDI 1 (SDI A) SA’x’ Rear Panel BNC input 1 (input A), (x indicates the AES pair 1>8) SDI 2 (SDI B) SB’x’ Rear Panel BNC input 2 (input B), (x indicates the AES pair 1>8) Analog Signals With an analog input signal selected, push the S OURCE button to toggle between A0 or ...
- Page 5 The X TM4 can store the parameters selected for analog, digital or sdi metering. After cycling through the options, the X TM4 will store the most recent parameters for the ...
- Page 6 SDI DEMUX OPTION Serial digital video signals can carry up to four groups of two AES digital audio signals (16 monaural signals). Adding the demux option enables the user to extract these ...
- Page 7 SPECIFICATIONS SDI INPUTS/OUTPUT Input Impedance 75Ω Input Level 0.8 Vpp (typical) Output Level 0.8 V pp Output Impedance 75Ω Data Rate 27014852970 Mbps DIGITAL Input Standard 110 Ohm, transformer balanced XLR3 75 Ohm, unbalanced BNC TRS front panel jack Input Level 0.25Vpp Sampling Frequency Range 30 kHz to 96 kHz Meter Level 0 VU = 50 dBFS to 0 dBFS Frequency Response +0.25 dB 50 Hz to 20 kHz ANALOG ...
- Page 8 WardBeck Systems Ltd. reserves the right to change performance specifications without prior notice. WARRANTY All WardBeck Systems Ltd. products are warranted against defective materials and workmanship for a period of one year from the date of shipment. WardBeck Systems Ltd. will repair or replace, at its option and without charge, all said products ...
- Page 9 Website: www.ward beck.com EMail: sales@ward beck.com ...