Advertisement
This fixture may have an integral photo sensor that turns the fixture off during the day and on at night. The photo sensor is not
HOOD
adjustable. The fixture could possibly cycle on and off due to light reflected from nearby surfaces into the photo sensor. If cycling
occurs, remove the photo sensor nut and install the swivel hood and base.
BASE
The hood and base are adjustable. The hood can be rotated and the base can be cut along the dotted line to reduce overall length. Check operation
before cutting the base.
BALLAST AND LAMP REPLACEMENT INSTRUCTIONS
Product contains an integrated Lamp/Ballast combination. To remove, grasp plastic area on each side of
bulb area and rotate counterclockwise. Replace with MAX 26W SBCFL(GU-24) that is marked with the
UL and C, US Logo. Use SBCFL marked - Not for use where directly exposed to water. Do not use SBCFL
marked - Not for use in totally enclosed luminaire.
The hood and base are adjustable. The hood can be rotated and the base can be cut along the dotted line to reduce overall length. Check operation
before cutting the base.
Mark means lamp contains Mercury.
Product contains an integrated Lamp/Ballast combination. To remove, grasp plastic area on each side of
Hg
Follow disposal laws.
bulb area and rotate counterclockwise. Replace with MAX 26W SBCFL(GU-24) that is marked with the
See www.lamprecycle.org
UL and C, US Logo. Use SBCFL marked - Not for use where directly exposed to water. Do not use SBCFL
marked - Not for use in totally enclosed luminaire.
This fixture may have an integral photo sensor that turns the fixture off during the day and on at night. The photo sensor is not
HOOD
adjustable. The fixture could possibly cycle on and off due to light reflected from nearby surfaces into the photo sensor. If cycling
occurs, remove the photo sensor nut and install the swivel hood and base.
BASE
BALLAST AND LAMP REPLACEMENT INSTRUCTIONS
Mark means lamp contains Mercury.
Hg
Follow disposal laws.
See www.lamprecycle.org
Advertisement
