Advertisement
Quick Links
STONE SERIES INSTALLATION GUIDE
MODEL: S21S
If for some reason you are missing parts of have a problem with your fixture
DO NOT CALL OR RETURN TO THE RETAILER. Call for direct assistance at 1-877-870-9283.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING FIXTURES.
BEFORE INSTALLATION
1. Please check to see that your fixture was not damaged during shipment, and that you received all the hardware needed for
installation. While we strive for perfection, accidents do happen. If you have a problem or are missing any parts, please call
us at 1-877-870-9283 immediately.
2. CAUTION: Disconnect main power at the breaker box before beginning installation. Do not turn power off at the wall
switch only. Failure to properly disconnect the main power supply may result in serious injury.
3. CAUTION: Install the appropriate size lamp in your Stone fixture. Do not exceed the manufacturer's maximum wattage
restrictions.
4. SPECIAL NOTE: For easier installation, it is recommended the two (2) people be used when making the electrical connections
and mounting the fixture.
HARDWARE
INSTALLATION
1
Disconnect main power supply at the breaker box.
DO NOT turn power off at the wall switch only.
CAUTION: FAILURE TO DISCONNECT MAIN
ELECTRICAL POWER MAY RESULT IN SERIOUS
INJURY.
5
4
8
9
10
TURN ON MAIN POWER.
Customer Service 1-877-870-9283
www.wavelighting.com
1102454-GUES
2
3
7
6
Install integrated lamp/ballast
(SBCFL). Use SBCFL specified on
fixture. Grasp the plastic base,
insert pins into socket and rotate
clockwise until secure.
ALWAYS CONNECT BLACK TO BLACK,
WHITE TO WHITE, AND BARE OR
GREEN GROUNDING CONNECTORS
STONE SERIES INSTALLATION GUIDE
MODEL: S21S
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING FIXTURES.
BEFORE INSTALLATION
1. Please check to see that your fixture was not damaged during shipment, and that you received all the hardware needed for
installation. While we strive for perfection, accidents do happen. If you have a problem or are missing any parts, please call
us at 1-877-870-9283 immediately.
2. CAUTION: Disconnect main power at the breaker box before beginning installation. Do not turn power off at the wall
switch only. Failure to properly disconnect the main power supply may result in serious injury.
3. CAUTION: Install the appropriate size lamp in your Stone fixture. Do not exceed the manufacturer's maximum wattage
restrictions.
4. SPECIAL NOTE: For easier installation, it is recommended the two (2) people be used when making the electrical connections
and mounting the fixture.
HARDWARE
INSTALLATION
1
Disconnect main power supply at the breaker box.
DO NOT turn power off at the wall switch only.
CAUTION: FAILURE TO DISCONNECT MAIN
ELECTRICAL POWER MAY RESULT IN SERIOUS
INJURY.
4
8
LIGHT FIXTURE
120 VOLT POWER SUPPLY
1102454-GUES
If for some reason you are missing parts of have a problem with your fixture
DO NOT CALL OR RETURN TO THE RETAILER. Call for direct assistance at 1-877-870-9283.
2
6
5
9
10
TURN ON MAIN POWER.
Customer Service 1-877-870-9283
www.wavelighting.com
3
7
Install integrated lamp/ballast
(SBCFL). Use SBCFL specified on
fixture. Grasp the plastic base,
insert pins into socket and rotate
clockwise until secure.
LIGHT FIXTURE
120 VOLT POWER SUPPLY
ALWAYS CONNECT BLACK TO BLACK,
WHITE TO WHITE, AND BARE OR
GREEN GROUNDING CONNECTORS
Advertisement
Summary of Contents for WAVE LIGHTING STONE Series
- Page 1 STONE SERIES INSTALLATION GUIDE STONE SERIES INSTALLATION GUIDE MODEL: S21S MODEL: S21S If for some reason you are missing parts of have a problem with your fixture If for some reason you are missing parts of have a problem with your fixture DO NOT CALL OR RETURN TO THE RETAILER.
- Page 2 This fixture may have an integral photo sensor that turns the fixture off during the day and on at night. The photo sensor is not This fixture may have an integral photo sensor that turns the fixture off during the day and on at night. The photo sensor is not HOOD adjustable.