Security - LG KE850 PRADA User Manual

Send my number
(network and subscription dependent)
Set by network
°
If you select this, you can send your phone
number depending on two line service such as
line 1 or line 2.
On
°
You can send your phone number to another
party. Your phone number will be shown on the
receiver's phone.
Off
°
Your phone number will not be shown.
Call waiting
(Menu 3.4.3)
(network dependent)
Activate
°
If you select Activate, you can accept a waiting
(receiving) call.
Cancel
44
°
If you select Cancel, you cannot recognize the
waiting (receiving) call.
View status
°
Shows the status of Call waiting.
Minute minder
If you select On, you can check the call duration
by a beep sound given every minute during a call.
Auto redial
(Menu 3.4.5)
On
°
When this function is activated, the phone will
automatically try to redial in the case of failure
to connect a call.
Off
°
Your phone will not make any attempts to
redial when the original call has not connected.
(Menu 3.4.2)
(Menu3.4.4)
Send DTMF tones
(Menu 3.4.6)
You can send touch tones during an active call to
control your voice mailbox or other automated
phone services.
Information
DTMF tone: Dual Tones Multiple Frequency.
Select line
(Menu 3.4.7)
(SIM dependent)
This menu is shown only if the SIM supports two
subscriber numbers, that is, two phone lines.
Select which phone line (between Line 1 and Line
2) you want to use for making calls and sending
short messages. Calls on both lines can be
answered irrespective of the selected line.

Security

(Menu 3.5)
Request PIN code
(Menu 3.5.1)
In this menu, you can set the phone to ask for the
PIN code of your SIM card when the phone is
switched on.
If this function is activated, you'll be requested to
enter the PIN code.
1. Select Request PIN code in the security
settings menu.
2. Set Enable/Disable.
3. If you want to change the setting, you need to
enter PIN1 code when you switch on the phone.
4. If you enter wrong PIN1 code more than 3
times, the phone will lock out. If the PIN1 is
blocked, you will need to key in PUK code.
5. You can enter your PUK code up to 10 times. If
you put wrong PUK code more than 10 times,
you can not unlock your phone. You will need to
contact your service provider.