FGM SH210P User Manual

Product Description

Thank you for using our SH210P fish tank/bath thermometer. It is structurally sealed and
waterproof. It can measure and display water temperature which is mainly used for
real-time monitoring of water temperature in aquarium, bath, pool, swimming pool and
other places.

Features


Measuring range: 0~70° C,

Accuracy: ± 1 ° C

LCD display temperature

Fahrenheit / Celsius temperature unit conversion

Use a 3Vdc CR2032 cell

Product size: D84xH46mm

Instructions

-Install the battery
Unscrew the thermometer cover counterclockwise, remove the battery insulation strip or
reload one 3Vdc CR2032 cell battery. Press the S key on the board to display the unit
conversion. Press and hold the S button to turn the thermometer on or off.
-Place the Thermometer
Rotate the upper and lower covers of the thermometer clockwise. When measuring the
water temperature of the tank, use a plastic suction cup to attach the thermometer to the
inner wall of the tank. When measure the temperature of the bath or the swimming pool,
place the thermometer in the water and pass the rope through the thermometer. A small
hole in the installation, and then the other end of the rope is hovering somewhere so that
the thermometer does not drift away in the water.
SH210P Aquarium/bath thermometer
User manual