Rating Plate/Service Information - GE DNCJ440EB Technical Service Manual

RATING PLATE AND SERVICE INFORMATION LOCATION
GE Commercial Gas and Electric Dryers have a
Rating Plate located on the front inside door
opening at the top right. It lists the Model Number,
UL listings, and individual product serial number.
You can see the rating plate by simply opening the
dryer door.
CAUTION!: Always disconnect appliance from
power prior to servicing to avoid shock hazard.
A mini-manual is provided inside the control panel
and has basic service information. On the back
side of the mini-manual is the product schematic,
which is valuable in troubleshooting any problems.
Resistances, voltages, and wiring colors are
shown and can be used with a volt-ohm meter to
check circuitry, and components.
Remove 4 Screws
Dual Seven Segment
Display (DSSD)
The illustrations on the right provide graphic
Card
information on how to access the mini-manual by
Reader
removing (4) T-20H Torx screws from the top of
the control panel and rolling it over on the top of
the dryer. The second illustration shows mini-
manual location, as well as SmartCard reader
access.
Connector Cable
Mini Manual
Card Reader
Remove 4 Screws
2